Re: Fwd: Have anybody installed ncarg on Mac OS 10.6

Hi Mary,

Thank you very much!

I have backuped all my data and cleaned my hard disk for installing a total
new Mac OS X 10.6 system.

I installed Xcode from the install DVD. Now I have gcc-4.2 and gfortran-4.2.
I will give try to precompiled binary file.
And then try install the dependencies one by one.

Keeping letting you know.

Thanks.

Guangshan

On Fri, Nov 6, 2009 at 4:35 PM, Mary Haley <haley@ucar.edu> wrote:

>
> On Nov 6, 2009, at 11:21 AM, guangshan chen wrote:
>
> Hi Mary,
>
> Thanks for your reply.
>
> Sourish Basu suggested me to use the precompiled NCL. So I downloaded a
> precompiled NCL binary for the website.
> There is "ncl" inside and it works. But when I can not use WRAPIT.
>
> Here is the information when I use WRAPIT:
>
> guangshan% WRAPIT calculate_distance_1d.f
>
> WRAPIT Version: 091416
> COMPILING calculate_distance_1d.f
> LINKING
> ld: warning: in calculate_distance_1d.o, file is not of required
> architecture
> END WRAPIT
>
>
> Guangshan,
>
> Can you run:
>
> WRAPIT -d calculate_distance_1d.f
>
> This will echo all the compilation that's taking place. I'm not familiar
> with MacOS 10.6, but this may be a 32/64 compilation issue. The NCL you
> have is 32-bit, and the compilation may be 64-bit.
>
>
>
> I first email this problem to Macport. Nobody answers to me. Do you know
> who built this ncarg port for Macport?
>
>
> No, I'm sorry, I don't, but there's some information that comes up if you
> google "macport ncl".
>
>
> I built all the external dependencies one by one using Macport. I think
> this is why I got the same problem as I build from source
> code. Unfortunately, I deleted the make-outfile now. I will rebuild it
> sometime today and send it to you offline.
>
> By the way, when I tried to build the dependencies of NCL, some
> dependencies I could not build successfully. What is the pre-required
> compliers or dependencies to build the dependencies of NCL?
>
>
> These are listed at:
>
>
> http://www.ncl.ucar.edu/Download/build_from_src.shtml#BuildNonOptionalSoftware
>
> This list is of the non-optional software, which includes NetCDF, JPEG,
> zlib, and HDF4.
>
> The following section covers the optional software, like GRIB2, HDF-EOS,
> and Udunits.
>
> There's detailed information about how to build each package.
>
> The required compilers are basically gcc and gfortran. You can use other
> compilers, but you will always need a basic C compiler and a Fortran 77
> compiler.
>
> --Mary
>
>
>
> Guangshan
>
> On Nov 6, 2009, at 10:21 AM, Mary Haley wrote:
>
> Guangshan,
>
> If you downloaded a precompiled NCL binary from the website, it would
> definitely have "ncl" in $NCARG_ROOT/bin, or we would have heard from a lot
> more users by now.
>
> The MacPort version is trying to build NCL from source code, so it doesn't
> surprise me if it failed on your system. There are a lot of external
> dependencies for NCL to be built correctly, and if any one of these fail,
> then the build of the "ncl" executable is going to fail as well. I'm not
> familiar with the MacPort build, so I'm not sure what might have caused it
> to fail. However, I would double-check that all the external dependencies
> built successfully.
>
> If you downloaded NCL source code from the ESG website and tried to build
> it yourself, then chances are that it failed because of the external
> dependencies as well.
>
> If you tried to build NCL from source code, then please email me the
> "make-output" file offline. I'll take a look to see what the problem is.
>
> --Mary
>
> On Nov 6, 2009, at 12:24 AM, guangshan chen wrote:
>
> Hi all,
>
> I try two ways to install ncl on Mac OS 10.6.
>
> One is easy way using Macport. It shows there is no problem to install it.
> But I can not find ncl command in bin directory. I found the follows, such
> as WRAPIT.
>
> The other way is to following the NCL website to install it. I got the
> same.
>
> Have anybody met the same thing? Any suggestion?
>
> Thanks
>
> Guangshan
>
>
> Begin forwarded message:
>
> *From: *guangshan chen <gchen9@gmail.com>
> *Date: *November 5, 2009 9:07:40 PM CST
> *To: *macports-users@lists.macosforge.org
> *Subject: **Have anybody installed ncarg on Mac OS 10.6*
>
> Hi there,
>
> Today I install ncarg on my Mac OS 10.6 using Macport. It shows that ncarg
> has been installed.
> But when I check /opt/local/bin, there is no "ncl" executable command
> created.
>
> guangshan% sudo port install ncarg
> ---> Computing dependencies for ncarg
> ---> Fetching ncarg
> ---> Verifying checksum(s) for ncarg
> ---> Extracting ncarg
> ---> Configuring ncarg
> ---> Building ncarg
> ---> Staging ncarg into destroot
> ---> Installing ncarg @5.1.1_1
> ---> Activating ncarg @5.1.1_1
> ---> Cleaning ncarg
>
>
> The following binary file installed:
> -rwxr-xr-x 2 root admin 1742552 Nov 5 21:00 nnalg*
> -rwxr-xr-x 2 root admin 451112 Nov 5 21:00 rascat*
> -rwxr-xr-x 2 root admin 28528 Nov 5 21:00 ncgm2cgm*
> -rwxr-xr-x 2 root admin 533 Nov 5 21:00 ncarvversion*
> -rwxr-xr-x 2 root admin 63272 Nov 5 21:00 med*
> -rwxr-xr-x 2 root admin 712840 Nov 5 21:00 ictrans*
> -rwxr-xr-x 2 root admin 1003 Nov 5 21:00 gcaps*
> -rwxr-xr-x 2 root admin 851 Nov 5 21:00 fcaps*
> -rwxr-xr-x 2 root admin 653888 Nov 5 21:00 ctrans*
> -rwxr-xr-x 2 root admin 846 Nov 5 21:00 ctlib*
> -rwxr-xr-x 2 root admin 28600 Nov 5 21:00 cgm2ncgm*
> -rwxr-xr-x 2 root admin 448928 Nov 5 21:00 rasview*
> -rwxr-xr-x 2 root admin 433624 Nov 5 21:00 rasstat*
> -rwxr-xr-x 2 root admin 420496 Nov 5 21:00 rassplit*
> -rwxr-xr-x 2 root admin 433728 Nov 5 21:00 rasls*
> -rwxr-xr-x 2 root admin 429936 Nov 5 21:00 rasgetpal*
> -rwxr-xr-x 2 root admin 442408 Nov 5 21:00 ras2ccir601*
> -rwxr-xr-x 2 root admin 38960 Nov 5 21:00 ncgmstat*
> -rwxr-xr-x 2 root admin 73048 Nov 5 21:00 idt*
> -rwxr-xr-x 2 root admin 59272 Nov 5 21:00 wrapit77*
> -rwxr-xr-x 2 root admin 6322 Nov 5 21:00 scrip_check_input*
> -rwxr-xr-x 2 root admin 2234 Nov 5 21:00 nhlf90*
> -rwxr-xr-x 2 root admin 2234 Nov 5 21:00 nhlf77*
> -rwxr-xr-x 2 root admin 2438 Nov 5 21:00 nhlcc*
> -rwxr-xr-x 2 root admin 30531 Nov 5 21:00 ng4ex*
> -rwxr-xr-x 2 root admin 2540 Nov 5 21:00 ncl_grib2nc*
> -rwxr-xr-x 2 root admin 14179 Nov 5 21:00 ncl_filedump*
> -rwxr-xr-x 2 root admin 47762 Nov 5 21:00 ncl_convert2nc*
> -rwxr-xr-x 2 root admin 26600 Nov 5 21:00 WRAPIT*
> drwxr-xr-x 803 root admin 27302 Nov 5 21:01 ./
>
>
> _______________________________________________
> ncl-install mailing list
> List instructions, subscriber options, unsubscribe:
> http://mailman.ucar.edu/mailman/listinfo/ncl-install
>
>
>
>
>
Received on Fri Nov 6 21:25:05 2009