Re: I want it draw Right Yaxis tickmarks without lables or tittles, but what I did was not willing to make it work.

Hi Li,

The res1 resources control the left Y axis, and the res2 resources
control the right Y axis. So, you don't want to set tmYR* resources
with the "res1" variable.

Remove the res1_at_tmYR* and the res1_at_tmYUseLeft settings, and then try
this:

     res2_at_tiYAxisString = ""
; res2_at_tmYRMode = "Automatic"
; res2_at_tmYUseLeft = False
; res2_at_tmYROn = True
     res2_at_tmYRLabelsOn = False

--Mary

On Wed, 10 Jan 2007, lxf wrote:

> Hi,
> I have a little problem about tickmark and labels. I plot two lines in one figure using "gsn_csm_x2y2".
> Because of the y axis is the same, I want it draw Right Yaxis tickmarks without lables or tittles.
> So, I use :
> res1_at_tiYAxisString = ""
> res1_at_tmYRMode = "Automatic"
> res1_at_tmYUseLeft = False
> res1_at_tmYROn = True
> res1_at_tmYRLabelsOn = False
>
> res2_at_tiYAxisString = ""
> res2_at_tmYRMode = "Automatic"
> res2_at_tmYUseLeft = False
> res2_at_tmYROn = True
> res2_at_tmYRLabelsOn = False
> But,it does not work. Is there anybody can help me?
> The picture is too big to attached behind .And I think the complete code maybe helpful to find out the problem.
> ;================================
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
>
> begin
> fi = "response.hb.grd"
> n = 20000
> nrec = 0
> dims = (/n/)
> t0 = 5
> t1 = 10
> trx0 = 0
> trx1 = 0.6
> try0 = -0.1
> try1 = 1.1
>
> hb = fbindirread (fi,0,dims,"float")
> hl = fbindirread (fi,1,dims,"float")
> xhb = fbindirread (fi,2,dims,"float")
> xhl = fbindirread (fi,3,dims,"float")
> ;========================
> data = new((/2,dimsizes(hb)/),float)
> xaxis = new((/2,dimsizes(xhb)/),float)
> data(0,:) = hb(:)
> data(1,:) = hl(:)
> xaxis(0,:) = xhb(:)
> xaxis(1,:) = xhl(:)
>
> ; Set line colors and dash patterns for both curves.
> ;
> line_col2 = "red"
> line_col1 = "blue"
> line_pat2 = 0 ; Solid
> line_pat1 = 2 ; Dashed
> m1 = "Butterworth(5~10days)" ;legend lable
> m2 = "Lanczos(5~10days)"
>
> ; wks = gsn_open_wks("X11","x2y2") ; Open "xy.ps"
> wks = gsn_open_wks ("eps","5-10") ; Open "xy.ps"
>
> res1 = True
> res1_at_gsnFrame = False
> res1_at_gsnMaximize = True ; Maximize plot in frame.
>
> res1_at_xyLineColor = line_col1
> res1_at_xyDashPattern = line_pat1
> res1_at_xyLineThicknesses = 3 ; line thicker
>
>
> res1_at_tiYAxisString = ""
> res1_at_tmYRMode = "Automatic"
> res1_at_tmYUseLeft = False
> res1_at_tmYROn = True ; Don't draw labels for
> res1_at_tmYRLabelsOn = False ; right Y axes, b/c left
> res1_at_tmXBLabelFontColor = line_col1 ; and right axes are same.
>
> res1_at_trXMinF = trx0
> res1_at_trXMaxF = trx1
> res1_at_trYMinF = try0
> res1_at_trYMaxF = try1
>
> res1_at_tiXAxisString = "Frequency"
> res1_at_tiYAxisString = "Response"
> ; res1_at_gsnCenterString = "days"
>
> res2 = True
> res2_at_gsnFrame = False
> res2_at_gsnMaximize = True ; Maximize plot in frame.
>
> res2_at_xyLineColor = line_col2
> res2_at_xyDashPattern = line_pat2
> res2_at_xyLineThicknesses = 2 ; line thicker
>
> res2_at_tiYAxisString = ""
> res2_at_tmYRMode = "Automatic"
> res2_at_tmYUseLeft = False
> res2_at_tmYROn = True ; Don't draw labels for
> res2_at_tmYRLabelsOn = False ; right Y axes, b/c left
> res2_at_tmXTLabelFontColor = line_col2 ; and right axes are same.
>
> res2_at_trXMinF = res1_at_trXMinF
> res2_at_trXMaxF = res1_at_trXMaxF
> res2_at_trYMinF = res1_at_trYMinF
> res2_at_trYMaxF = res1_at_trYMaxF
>
> res2_at_tmXUseBottom = False ; Keep top axis independent of bottom.
> res2_at_tmXTLabelsOn = True ; have tick mark labels
> res2_at_tmXTOn = True ; have tick marks
> res2_at_tmXBBorderOn = False
> res2_at_tmXTMode = "Explicit" ; label independently
> res2_at_tmXTValues = (/ 1./t0,1./t1 /)
> res2_at_tmXTLabels = (/ t0,t1/)
> ;
> ; Here's the call to draw two curves, each with their own set of
> ; axes. This example is a little unusual, because we went through
> ; the trouble of making both Y axes the same.
> ;
> plot = gsn_csm_x2y2(wks,xaxis(0,:),xaxis(1,:),data(0,:),data(1,:),res1,res2)
> ;==============================================
> ; Draw some text and lines to create a legend.
> ;
> res_text = True
> res_text_at_txFontHeightF = 0.015
> res_text_at_txJust = "CenterLeft"
>
> res_lines = True ; polyline mods desired
> res_lines_at_gsLineColor = line_col1 ; line color
> res_lines_at_gsLineThicknessF = 2 ; line thicker
> res_lines_at_gsLineDashPattern = line_pat1 ; dash pattern
>
> xx = (/0.35,0.40/)
> yy = (/.95,.95/)
> gsn_polyline(wks,plot,xx,yy,res_lines)
> gsn_text(wks,plot,m1,0.41,.95,res_text)
>
> yy = (/0.90,0.90/)
> res_lines_at_gsLineColor = line_col2 ; line color
> res_lines_at_gsLineDashPattern = line_pat2 ; dash pattern
> gsn_polyline(wks,plot,xx,yy,res_lines)
> gsn_text(wks,plot,m2,0.41,0.90,res_text)
> ;=============================================
> ; Draw some lines
> ;
> res_lines = True ; polyline mods desired
> res_lines_at_gsLineColor = 1 ; line color
> res_lines_at_gsLineThicknessF = 1 ; line thicker
> res_lines_at_gsLineDashPattern = 0 ; dash pattern
>
> xx = (/ 1./t1,1./t1 /)
> yy = (/ try0,try1 /)
> gsn_polyline(wks,plot,xx,yy,res_lines)
> xx = (/ 1./t0,1./t0 /)
> yy = (/ try0,try1 /)
> gsn_polyline(wks,plot,xx,yy,res_lines)
> xx = (/ trx0,trx1 /)
> yy = (/ 0,0 /)
> gsn_polyline(wks,plot,xx,yy,res_lines)
> yy = (/ 1,1 /)
> gsn_polyline(wks,plot,xx,yy,res_lines)
>
> frame(wks)
> end
>
>
>
> Li
> 2007-01-10
>
>
>
> _______________________________________________
> ncl-talk mailing list
> ncl-talk_at_ucar.edu
> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
_______________________________________________
ncl-talk mailing list
ncl-talk_at_ucar.edu
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
Received on Wed Jan 10 2007 - 09:54:51 MST