Re: wrf_user_fortran_util_0.so, file not loaded

Bernie,

I don't think I ever responded to your most recent message.
You probably got this working by now!

Anyway, it's very likely that your LD_LIBRARY_PATH is not
being "seen" by your CGI script, and you may need to
set this inside the script itself.

--Mary

On Fri, 27 Jun 2008, bbaer_at_internode.on.net wrote:

> Hi Mary, thanks.
> In /root/.bashrc :
> export LD_LIBRARY_PATH=/home/admin/DRJACK/UTIL/PGI
>
> The file looks OK:
> [root_at_ns1 root]# cd /home/admin/DRJACK/UTIL/PGI
> [root_at_ns1 PGI]# ls -la
> total 620
> drwxrwxr-x 2 500 500 4096 2008-03-26 15:48 .
> drwxr-xr-x 5 root root 4096 2007-09-26 15:36 ..
> -rwxr-xr-x 1 root root 109944 2007-09-28 15:08 libg2c.so.0
> -r-xr-xr-x 1 root root 395769 2008-03-26 15:48 libguide.so
> -r-xr-xr-x 1 500 500 104864 2005-11-13 09:06 libpgc.so
>
> It was built on a different machine. But I think it is used
> elsewhere in this propgram suite succesfully.....
>
> The program calling this is a cgi script from a web page, so
> I suspect it may be related to the apache environment?
> My apologies, this code was all written by someone else and
> I have virtually no programming skills, just some sys admin
> skills.
> Regards, Bernie.
>
>> Bernie,
>>
>> What exactly do you have LD_LIBRARY_PATH set to?
>>
>> If "libpgc.so" was in the directory /usr/local/lib, say,
>> then you would set:
>>
>> setenv LD_LIBRARY_PATH /usr/local/lib
>>
>> Was this *.so built on the same machine that you are
>> trying to load it on? Perhaps the libpgc.so is at a
>> different version, or could be soft-linked to a bad file.
>> You should do an "ls -l" on the file to see if it is
>> linked to a valid file.
>>
>> Just FYI: the latest version of NCL has many of the WRF
>> functions built-in, so you may not need these *.so files.
>> You can see a full list of WRF functions (both analysis
>> and graphical) at:
>>
>> http://www.ncl.ucar.edu/Document/Functions/wrf.shtml
>>
>>
>> --Mary
>>
>> On Fri, 27 Jun 2008, Bernie Baer wrote:
>>
>>> Hello all,
>>> any advice why wrf_user_fortran_util_0.so would not be
>>> loaded? $LD_LIBRARY_PATH is pointing to the directory
>>> where libpgc.so is located, so that is a mystery also.
>>> Output of script is below, thanks, Bernie.
>>>
>>> Copyright (C) 1995-2007 - All Rights Reserved
>>> University Corporation for Atmospheric Research
>>> NCAR Command Language Version 4.3.1
>>> The use of this software is governed by a License
>>> Agreement. See http://www.ncl.ucar.edu/ for more
>>> details. (0) ENV_NCL_ID= Valid 1400 LST THU 26 Jun
>>> 2008 = (0) ENV_NCL_REGIONNAME= NEWSOUTHWALES =
>>> (0)
>>> ENV_NCL_FILENAME=
>>>
>> /home/admin/DRJACK/WRF/WRFV2/RASP/NEWSOUTHWALES/wrfout_d02
>>> _2008-06-26_03:00:00 =?
>>> (0) ENV_NCL_OUTDIR= /tmp =
>>> (0) ENV_NCL_PARAMS=
>>> sounding0_NEWSOUTHWALES_-33.511_147.871 = (0)
>>> ENV_NCL_CONTOURS= missing = (0)
>>> ENV_NCL_INFOFILENAME= missing = warning:An error
>>> occurred loading the external file
>>> ./wrf_user_fortran_util_0.so, file not loaded libpgc.so:
>>> cannot open shared object file: No such file or
>> directory ^Mwarning:error at line 4 in file
>> wrf_user_mass.ncl >
>>> ^Mfatal:syntax error: line 177 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 181 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 184 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 200 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 208 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 210 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 225 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 233 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 235 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 249 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 256 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 258 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 279 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 281 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 316 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> --------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:Syntax Error in block, block not executed
>>> ^Mfatal:error at line 338 in file wrf_user_mass.ncl
>>>
>>> ^Mfatal:syntax error: line 525 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 662 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 684 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 710 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 736 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 760 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 783 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 800 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 832 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:syntax error: line 834 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> -------------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:Syntax Error in block, block not executed
>>> ^Mfatal:error at line 866 in file wrf_user_mass.ncl
>>>
>>> ^Mfatal:syntax error: line 909 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ----------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:Syntax Error in block, block not executed
>>> ^Mfatal:error at line 912 in file wrf_user_mass.ncl
>>>
>>> ^Mfatal:syntax error: line 931 in file wrf_user_mass.ncl
>>> before or near : wrf_user_fortran_util_0 :
>>> ----------------------------^
>>>
>>> ^Mfatal:error in statement
>>> ^Mfatal:Syntax Error in block, block not executed
>>> ^Mfatal:error at line 950 in file wrf_user_mass.ncl
>>>
>>> ^Mwarning:An error occurred loading the external
>>> file ./ncl_jack_fortran.so, file not loaded
>>> libpgc.so: cannot open shared object file: No such file
>>> or directory ^Mwarning:error at line 130 in file
>> rasp.ncl >
>>> ^M(0) >>> using NON-FIXED COLORS
>>> fatal:Could not open (rasp.site_load.initialization.ncl)
>>> ^Mfatal:error at line 659 in file rasp.ncl
>>>
>>>
>>>
>>>
>>>
>> ----------------------------------------------------------
>> ---------------------- >
>>>
>>>
>
_______________________________________________
ncl-talk mailing list
ncl-talk_at_ucar.edu
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
Received on Fri Jul 11 2008 - 11:28:41 MDT