Re: question

Mary,

Now its showing map but without data. And giving following:

(0) check_for_y_lat_coord: Warning: Data either does not contain a valid latitude coordinate array or doesn't contain one at all.
(0) A valid latitude coordinate array should have a 'units' attribute equal to one of the following values:
(0) 'degrees_north' 'degrees-north' 'degree_north' 'degrees north' 'degrees_N' 'Degrees_north' 'degree_N' 'degreeN' 'degreesN' 'deg north'
(0) check_for_lon_coord: Warning: Data either does not contain a valid longitude coordinate array or doesn't contain one at all.
(0) A valid longitude coordinate array should have a 'units' attribute equal to one of the following values:
(0) 'degrees_east' 'degrees-east' 'degree_east' 'degrees east' 'degrees_E' 'Degrees_east' 'degree_E' 'degreeE' 'degreesE' 'deg east'

How to handle this?

-Ibraheem

----- Original Message -----
From: "Mary Haley" <haley_at_ucar.edu>
To: "Ibraheem Khan" <khan18_at_atmos.uiuc.edu>
Cc: ncl-talk_at_ucar.edu
Sent: Thursday, June 25, 2009 2:32:52 PM GMT -06:00 US/Canada Central
Subject: Re: question

You have

    res_at_gsnDraw = False

This turns off drawing by the gsn_csm_xxxx function.

Remove or comment this line out.

--Mary

On Thu, 25 Jun 2009, Ibraheem Khan wrote:

> Hi David,
>
> I am using following script to calculate the point time series correlation with the time series grid data. But no output is turning up. Can you or anyone look at it to point out anything missing.
> Thanks
>
> Script:
>
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/shea_util.ncl"
>
> begin
> ;**********************************************
> ; Reading Data and correlation function
> ;**********************************************
> f1 = addfile("6104_01.nc","r")
> f2 = addfile("avg_6104_01.nc","r")
> x1 = f1->a ;time series grid data
> x2 = f2->a ;point time series
> print(x1)
> print(x2)
> st = dim_standardize_Wrap(x2,1)
> printVarSummary(st)
> c = escorc(x1(lat|:,lon|:,time|:),x2)
> copy_VarCoords(x1(0,:,:),c)
> printVarSummary(c)
>
> ;**********************************************
> ; create plot
> ;*********************************************
> wks = gsn_open_wks ("x11","cor_prcp_01") ; open ps file
>
> gsn_define_colormap(wks,"radar")
> res = True
> res_at_gsnDraw = False
> res_at_cnFillOn = True
> res_at_cnLinesOn = False
>
> res_at_gsnSpreadColors = True
> res_at_lbAutoLabelStride = True
>
>
> res_at_cnLevelselectionMode = "ManualLevels" ; manually set cn levels
> res_at_cnMinLevelValF = -1. ; min level
> res_at_cnMaxLevelValF = 1. ; max level
> res_at_tiMainString = ":F25:Prcp Point Corr"
>
> res_at_gsnLeftString = " "
> res_at_tiMainFontHeightF = 0.03
> res_at_gsnAddCyclic = False
> ;printVarSummary(c)
> plot = gsn_csm_contour_map_ce(wks,c,res)
> end
>
>
>
> -Ibraheem
>
>
> ----- Original Message -----
> From: "Dave Allured" <dave.allured_at_noaa.gov>
> To: ncl-talk_at_ucar.edu
> Sent: Wednesday, June 24, 2009 8:58:50 PM GMT -06:00 US/Canada Central
> Subject: Re: question
>
> Ibraheem,
>
> Point to grid correlation is easy. At each grid point, just compute
> the correlation between the single point time series and the time
> series for the grid point. The output from this is a single grid of
> correlation numbers. Just plot this field, using any generic
> contour plot function from NCL.
>
> How do you define correlation between two unequal regions? There
> are various definitions. First you need to have a good mathematical
> description of what you want, independent from any programming
> considerations.
>
> One definition is a simple cross correlation where single grid
> points at matching coordinates are correlated. If the regions are
> different sizes, then this makes a plot that is only the size of the
> small region, and blank in the remainder of the large region. This
> is the third example on the correlation example page:
>
> http://www.ncl.ucar.edu/Applications/corel.shtml
>
> Another definition is to reduce the small region to a single time
> series by a method of your choice, such as weighted or unweighted
> averaging. Then compute and plot the gridded correlation of the
> average time series to the larger region, similar to the single
> point case.
>
> Yet another definition is to start at one grid point in the larger
> region, and compute independent correlations to each point in the
> smaller region. Then combine the resulting correlation numbers to a
> single number by your choice of method, such as taking the mean or
> median. Repeat over all grid points of the larger region, and once
> again you have a single grid of numbers to plot in the usual way.
>
> Once you have decided on the definition, NCL has good matrix
> capability to help with the computations.
>
> Dave Allured
> CU/CIRES Climate Diagnostics Center (CDC)
> http://cires.colorado.edu/science/centers/cdc/
> NOAA/ESRL/PSD, Climate Analysis Branch (CAB)
> http://www.cdc.noaa.gov/psd1/
>
> Ibraheem Khan wrote:
>> Hi,
>>
>> I am thinking about drawing a correlation map. The correlation must be between a point value and gridded data. Also a correlation between two unequal gridded datasets (one covering a small region and the other a larger domain). Is it possible to do both correlations?
>> Thanks
>>
>> -Ibraheem
>>
>>
>> _______________________________________________
>> ncl-talk mailing list
>> List instructions, subscriber options, unsubscribe:
>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> _______________________________________________
> ncl-talk mailing list
> List instructions, subscriber options, unsubscribe:
> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> _______________________________________________
> ncl-talk mailing list
> List instructions, subscriber options, unsubscribe:
> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
Received on Thu Jun 25 2009 - 13:41:54 MDT