Just a slight correction: if you use gsnMaximize, you don't want to
additionally set vpXF and vpYF, because I believe this effectively
turns off gsnMaximize.
--Mary
On Thu, 24 Sep 2009, Adam Phillips wrote:
> Hi John,
> I'm not sure what combination of resources that you have tried. The
> simplest way to maximize the size of the plot is to set
> conres_at_gsnMaximize = True
> plot_base1 = gsn_csm_map(wks,conres)
>
> You shouldn't need to set any of the 4 vp resources to maximize the size
> of the plot, assuming gsnMaximize is set to True. However, I see that
> you have set mpShapeMode = "FreeAspect" in your conres/res resource
> lists. Setting that resource will change the aspect ratio of the plot,
> depending on the way you set vpWidthF, vpHeightF, vpXF, and vpYF. Try
> setting the following in your conres resource list:
>
> conres_at_gsnMaximize = True
> conres_at_mpShapeMode = "FreeAspect"
> conres_at_vpWidthF = 0.9
> conres_at_vpXF = 0.05
> conres_at_vpYF = 0.9
> conres_at_vpHeightF = 0.8
>
> The resources that I set above should maximize the plot on the page.
>
> You should not need to set any of those resources in your res resource
> list, as those resources are being used for an overlay plot, and thus
> the size of the plot is determined by the size of the base plot, in your
> case plot_base1 set with the conres resource list.
>
> Finally, if you are getting confused with respect to the NDC coordinate
> system that NCL uses, take a look at using the procedure drawNDCGrid:
> http://www.ncl.ucar.edu/Document/Functions/Shea_util/drawNDCGrid.shtml
> as it draws the NDC grid on your current plot for assistance in placing
> objects, as well as maximizing.
>
> If this advice doesn't help, please let ncl-talk know and include a .gif
> (or .jpg or .png) image so we can get a better handle as to what is
> going on.
> Best regards,
> Adam
>
>
>
>
> McCormick.JohnW_at_epamail.epa.gov wrote:
>>
>>
>> John W. McCormick, Systems Programmer / DBA
>> High Performance Computing & Scientific Visualization
>> Lockheed Martin Information Technology, Supporting the EPA
>> Research Triangle Park, NC
>> 919-541-0890
>>
>> Federal Infrastructure Contact - Ravi Nair
>> 919-541-5467 - nair.ravi_at_epa.gov <mailto:nair.ravi_at_epa.gov>
>> Federal Infrastructure Contact - Joe Retzer, Ph.D.
>> 919-541-4190 - retzer.joseph_at_epa.gov <mailto:retzer.joseph_at_epa.gov>
>>
>> ############################################
>> ### Work Information - (Signature) ###
>> ############################################
>> John W. McCormick, Systems Programmer, MD: N127-01
>> Lockheed Martin, Contractor to US-EPA
>> US-EPA, Bldg NCC, Rm N135B
>> Durham, NC 27711
>> Office: 919-541-0890
>> Fax : 919-541-0056
>> Work Email: mccormick.johnw_at_epa.gov <mailto:mccormick.johnw_at_epa.gov>
>>
>> In the following cshell script, I have imbedded an NCL script that
>> extracts out temperature values and plots them on a color contour map
>> (of Northern Gulf) along the Southern US coastal border. The main
>> problem is that the contour map (that is generated by the embedded NCL
>> script) cannot seem to be widened along the horizontal (left and right)
>> map borders. I have tried many ways in setting the various aspect ratio
>> widths (and height) but have not succeeded in getting the width large
>> enough so that the vertical labels don't seem to be so "crowded" into
>> (what I call the "canvas" of the map). Do you have any suggestions?
>>
>> Just a note: --- I don't seem to have as much of a problem with the
>> height (top and bottom margins) in having or creating room for the
>> labels and legends.
>>
>>
>> ##################################################################
>> ##
>> ## Script shown below:
>> ##
>> ##
>> ##################################################################
>>
>> #!/bin/csh
>> echo "##############################################################"
>> echo "##### "$0
>> echo "##### "$1
>> echo "##############################################################"
>> set FileName77 = $1
>> set Year77 = `echo $FileName77 | cut -c5-8`
>> echo "##############################################################"
>> echo "##"
>> echo "## Year is: $Year77"
>> echo "##"
>> echo "##############################################################"
>> set Month77 = `echo $FileName77 | cut -c9-10`
>> echo "##############################################################"
>> echo "##"
>> echo "## Month is: $Month77"
>> echo "##"
>> echo "##############################################################"
>> set Day77 = `echo $FileName77 | cut -c11-12`
>> echo "##############################################################"
>> echo "##"
>> echo "## Day77 is: $Day77"
>> echo "##"
>> echo "##############################################################"
>> set Hour77 = `echo $FileName77 | cut -c13-14`
>> echo "##############################################################"
>> echo "##"
>> echo "## Hour77 is: $Hour77"
>> echo "##"
>> echo "##############################################################"
>> set File_Name_Arg1 = 'FileName99="'"$FileName77"'"'
>> set File_Name_Arg2 = Year99="$Year77"
>> set File_Name_Arg3 = Month99="$Month77"
>> set File_Name_Arg4 = Day99="$Day77"
>> set File_Name_Arg5 = Hour99="$Hour77"
>> /usr/local/ncl_ncarg/bin/ncl \
>> $File_Name_Arg1 \
>> $File_Name_Arg2 \
>> $File_Name_Arg3 \
>> $File_Name_Arg4 \
>> $File_Name_Arg5 \
>> << EEOOFF
>> ;*************************************************
>> ; 20090730_testncl00.ncl
>> ;************************************************
>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/shea_util.ncl"
>> ;************************************************
>> begin
>> print(FileName99)
>> print(Year99)
>> print(Month99)
>> print(Day99)
>> print(Hour99)
>> MonthAA = (/"
>> ","Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec"/)
>>
>> NumberArray =
>> (/"00","01","02","03","04","05","06","07","08","09","10","11","12","13","14","15","16","17","18","19","20","21","22","23","24","25","26","27","28","29","30","31","32"/)
>>
>> HourAA =
>> (/"00","01","02","03","04","05","06","07","08","09","10","11","12","13","14","15","16","17","18","19","20","21","22","23","00"/)
>>
>>
>> Depth99=(/"0.0","2.5","5.0","7.5","10.0","15.0","20.0","25.0","30.0","35.0","40.0","45.0","50.0","60.0","70.0","80.0","90.0","100.0","125.0","150.0","200.0","250.0","300.0","400.0","500.0","600.0","700.0","800.0","900.0","1000.0"/)
>>
>> ;************************************************
>> ; read in netCDF file
>> ;************************************************
>> nc_file_in ="/amber/home/jpu/GulfBreeze/"+FileName99
>> ; a =
>> addfile("/amber/home/jpu/GulfBreeze/t3d_2009061100_nc_ascii.nc","r")
>> a = addfile(nc_file_in,"r")
>> ;************************************************
>> ; read in zonal [u] and meridional [v] winds
>> ;************************************************
>> do idepth = 0,30
>> T = a->temp(0,idepth,:,:) ; (time,lev,lat,lon)
>> ; T = a->temp(:,:,:,:) ; (time,lev,lat,lon)
>> ; T = a->temp(:,:,:,:) ; (time,lev,lat,lon)
>> lon = a->lon
>> lat = a->lat
>> dep = a->dep
>>
>>
>> ;************************************************
>> ; open ps (output) file and create plot
>> ;************************************************
>> ;wks = gsn_open_wks("ps","ocean"+Depth99(idepth)) ;
>> open ps file
>> wks =
>> gsn_open_wks("png","t3d_"+Year99+NumberArray(Month99)+NumberArray(Day99)+NumberArray(Hour99)+"_nc_ascii"+Depth99(idepth)+"TEST")
>> ; open png file
>> ; wks = gsn_open_wks("x11","max")
>> ; wks = gsn_open_wks("x11","ce")
>>
>> ; gsn_define_colormap(wks,"BlAqGrYeOrRe") ; choose colormap
>> gsn_define_colormap(wks,"rainbow") ; choose colormap
>> ; gsn_define_colormap(wks,"gui_default") ; choose colormap
>> ; ###############################################################
>> ; ##
>> ; ## Lat-Lon Lines Overlay
>> ; ##
>> ; ###############################################################
>> conres = True
>> ; conres_at_tiMainString <mailto:conres_at_tiMainString> =
>> "Plot_Base" ; add titles
>> ; conres_at_gsnMaximize <mailto:conres_at_gsnMaximize> = True
>> ; Maximize plot in frame
>> conres_at_gsnDraw <mailto:conres_at_gsnDraw> = False
>> conres_at_gsnFrame <mailto:conres_at_gsnFrame> = False
>> conres_at_sfXArray <mailto:conres_at_sfXArray> = lon
>> conres_at_sfYArray <mailto:conres_at_sfYArray> = lat
>> conres_at_gsnMajorLatSpacing <mailto:conres_at_gsnMajorLatSpacing> =
>> 5 ; change maj lat tm spacing
>> conres_at_gsnMajorLonSpacing <mailto:conres_at_gsnMajorLonSpacing> =
>> 5 ; change maj lon tm spacing
>> conres_at_mpMinLatF <mailto:conres_at_mpMinLatF> =
>> 27.5 ; map area
>> conres_at_mpMaxLatF <mailto:conres_at_mpMaxLatF> =
>> 30.7 ; map area
>> conres_at_mpMinLonF <mailto:conres_at_mpMinLonF> = -92.2
>> conres_at_mpMaxLonF <mailto:conres_at_mpMaxLonF> = -86.0
>> conres_at_mpGridLineColor <mailto:conres_at_mpGridLineColor> =
>> 3 ; Turn on grid lat/lon lines
>> conres_at_mpGridSpacingF <mailto:conres_at_mpGridSpacingF> =
>> 1.0 ; lat/lon lines every 2 deg
>> conres_at_mpGridLineDashPattern
>> <mailto:conres_at_mpGridLineDashPattern> = 2 ; lat/lon
>> lines as dashed
>> conres_at_txFontHeightF <mailto:conres_at_txFontHeightF> = 0.03
>> conres_at_tmYLLabels <mailto:conres_at_tmYLLabels> =
>> (/"28N","29N","30N"/)
>> conres_at_tmYLValues <mailto:conres_at_tmYLValues> =
>> (/28,29,30/)
>> conres_at_mpOutlineBoundarySets
>> <mailto:conres_at_mpOutlineBoundarySets>= "Geophysical"
>> conres_at_mpGeophysicalLineColor
>> <mailto:conres_at_mpGeophysicalLineColor>= "black"
>> conres_at_mpGeophysicalLineThicknessF
>> <mailto:conres_at_mpGeophysicalLineThicknessF> = 4.0
>> conres_at_mpFillBoundarySets <mailto:conres_at_mpFillBoundarySets>=
>> "GeophysicalAndUSStates" ; state boundaries
>> conres_at_mpLandFillColor <mailto:conres_at_mpLandFillColor> = "red"
>> conres_at_mpNationalLineColor
>> <mailto:conres_at_mpNationalLineColor> = 5
>> conres_at_mpNationalLineThicknessF
>> <mailto:conres_at_mpNationalLineThicknessF> = 5.2
>> conres_at_mpUSStateLineColor
>> <mailto:conres_at_mpUSStateLineColor> = "Background"
>> conres_at_mpUSStateLineThicknessF
>> <mailto:conres_at_mpUSStateLineThicknessF> = 4.0
>> conres_at_mpUSStateLineColor <mailto:conres_at_mpUSStateLineColor> =
>> "white" ; sets color of US State boundaries
>> conres_at_mpShapeMode <mailto:conres_at_mpShapeMode> =
>> "FreeAspect"
>> conres_at_tmXBValues <mailto:conres_at_tmXBValues> =
>> (/-92,-91,-90,-89,-88,-87,-86/)
>> conres_at_tmXBLabels <mailto:conres_at_tmXBLabels> =
>> (/"92W","91W","90W","89W","88W","87W","86W"/)
>> conres_at_mpFillOn <mailto:conres_at_mpFillOn> = True
>> conres_at_mpGridAndLimbOn <mailto:conres_at_mpGridAndLimbOn> =
>> True ; lat/lon lines on
>> conres_at_vpWidthF <mailto:conres_at_vpWidthF> = 0.65
>> conres_at_vpHeightF <mailto:conres_at_vpHeightF> = 0.65
>> conres_at_vpXF <mailto:conres_at_vpXF> = 0.15
>> conres_at_vpYF <mailto:conres_at_vpYF> = 0.85
>> plot_base1 = gsn_csm_map(wks,conres)
>> ; draw(plot_base1)
>> ; frame(wks)
>>
>> res = True
>> ; ###############################################################
>> ; gsn Stuff
>> ; ###############################################################
>> ; res_at_gsnMaximize <mailto:res_at_gsnMaximize> = True ;
>> Maximize plot in frame
>> res_at_gsnSpreadColors <mailto:res_at_gsnSpreadColors> = True
>> ; use full colormap
>> res_at_gsnMajorLatSpacing <mailto:res_at_gsnMajorLatSpacing> =
>> 1 ; change maj lat tm spacing
>> res_at_gsnMajorLonSpacing <mailto:res_at_gsnMajorLonSpacing> =
>> 1 ; change maj lon tm spacing
>> res_at_gsnDraw <mailto:res_at_gsnDraw> = False ; draw
>> picture
>> res_at_gsnFrame <mailto:res_at_gsnFrame> = False ;
>> advance frame
>> res_at_gsnContourZeroLineThicknessF
>> <mailto:res_at_gsnContourZeroLineThicknessF>= 3.5
>> ; res_at_gsnPaperOrientation <mailto:res_at_gsnPaperOrientation> =
>> "Landscape"
>> ; res_at_gsnPaperHeight <mailto:res_at_gsnPaperHeight> = 11.0
>> ; res_at_gsnPaperMargin <mailto:res_at_gsnPaperMargin> = 0.09
>> ; res_at_gsnOrientation <mailto:res_at_gsnOrientation> = "auto"
>> res_at_gsnLeftString <mailto:res_at_gsnLeftString> = "Date-
>> "+Year99+"-"+MonthAA(Month99)+"-"+Day99 ; right string title
>> res_at_gsnLeftStringFontHeightF
>> <mailto:res_at_gsnLeftStringFontHeightF> = .025
>> res_at_gsnRightString <mailto:res_at_gsnRightString> =
>> "Hour- "+HourAA(Hour99)+" GMT" ;right string title
>> res_at_gsnRightStringFontHeightF
>> <mailto:res_at_gsnRightStringFontHeightF> = .025
>> ; res_at_gsnMaskLambertConformal
>> <mailto:res_at_gsnMaskLambertConformal> = True
>> res_at_gsnBoxMargin <mailto:res_at_gsnBoxMargin> = 0.94
>> ; ###############################################################
>> ; cn Stuff
>> ; ###############################################################
>> res_at_cnLevelSelectionMode <mailto:res_at_cnLevelSelectionMode>=
>> "ManualLevels" ; set manual contour levels
>> res_at_cnMinLevelValF <mailto:res_at_cnMinLevelValF> =
>> 0. ; set min contour level
>> res_at_cnMaxLevelValF <mailto:res_at_cnMaxLevelValF> =
>> 30. ; set max contour level
>> res_at_cnLevelSpacingF <mailto:res_at_cnLevelSpacingF> =
>> 2.0 ; set contour spacing
>> res_at_cnLinesOn <mailto:res_at_cnLinesOn> =
>> True ; contour lines
>> res_at_cnFillOn <mailto:res_at_cnFillOn> =
>> True ; turn on color fill
>> res_at_cnLineLabelBackgroundColor
>> <mailto:res_at_cnLineLabelBackgroundColor>= 0 ; white bckgrnd
>> around label
>> res_at_cnFillDrawOrder <mailto:res_at_cnFillDrawOrder> =
>> "PreDraw" ; Put continents on top
>> res_at_cnMissingValFillColor <mailto:res_at_cnMissingValFillColor>
>> = "black"
>> res_at_cnMissingValFillPattern
>> <mailto:res_at_cnMissingValFillPattern> = 16
>> res_at_cnLineLabelsOn <mailto:res_at_cnLineLabelsOn> =
>> False ; turn line labels off
>> ; ###############################################################
>> ; lb Stuff
>> ; ###############################################################
>> res_at_lbLabelStride <mailto:res_at_lbLabelStride> =
>> 1 ; stride on label bar
>> res_at_lbOrientation <mailto:res_at_lbOrientation> =
>> "vertical" ; ncl default is vertical
>> res_at_lbTitleString <mailto:res_at_lbTitleString> = "Color
>> Table (Temp. in Degrees, C.) "
>> res_at_lbTitlePosition <mailto:res_at_lbTitlePosition> = "Right"
>> res_at_lbTitleOffsetF <mailto:res_at_lbTitleOffsetF> = 0.05
>> res_at_lbTitleAngleF <mailto:res_at_lbTitleAngleF> = 90.0
>> res_at_lbTitleDirection <mailto:res_at_lbTitleDirection> = "Up"
>> res_at_lbLabelFontHeightF <mailto:res_at_lbLabelFontHeightF> = .022
>> res_at_lbLabelOffsetF <mailto:res_at_lbLabelOffsetF> = 0.05
>> res_at_lbTitleFontHeightF <mailto:res_at_lbTitleFontHeightF> = .030
>> res_at_lbFillScaleF <mailto:res_at_lbFillScaleF> = True
>> ; res_at_lbAutoManage <mailto:res_at_lbAutoManage> = True
>> ; ###############################################################
>> ; sf Stuff
>> ; ###############################################################
>> res_at_sfXArray <mailto:res_at_sfXArray> = lon
>> res_at_sfYArray <mailto:res_at_sfYArray> = lat
>> ; ###############################################################
>> ; mp Stuff
>> ; ###############################################################
>> res_at_mpFillOceanColor <mailto:res_at_mpFillOceanColor> = 0
>> ; (white)
>> res_at_mpDefaultFillColor <mailto:res_at_mpDefaultFillColor> = 16
>> res_at_mpFillColors <mailto:res_at_mpFillColors> = (/0,0,0,0/)
>> ;globe is filled white
>> res_at_mpFillOn <mailto:res_at_mpFillOn> = True
>> res_at_mpOutlineOn <mailto:res_at_mpOutlineOn> =
>> True ; turn on map outline
>> res_at_mpMaskAreaSpecifiers <mailto:res_at_mpMaskAreaSpecifiers>=
>> "USStatesLand"
>> ; res_at_mpGridAndLimbOn <mailto:res_at_mpGridAndLimbOn> =
>> True ; lat/lon lines on
>> ; res_at_mpGridLineColor <mailto:res_at_mpGridLineColor> =
>> 1 ; Turn on grid lat/lon lines
>> ; res_at_mpGridSpacingF <mailto:res_at_mpGridSpacingF> =
>> 1.0 ; lat/lon lines every 2 deg
>> ; res_at_mpGridLineDashPattern <mailto:res_at_mpGridLineDashPattern> =
>> 2 ; lat/lon lines as dashed
>> res_at_mpTickMarkDisplayMode <mailto:res_at_mpTickMarkDisplayMode> =
>> "Always" ; turn on tickmarks
>> res_at_mpProjection <mailto:res_at_mpProjection> =
>> "CylindricalEquidistant"
>> res_at_mpUSStateLineColor <mailto:res_at_mpUSStateLineColor> =
>> "white" ; sets color of US State boundaries
>>
>>
>>
>> res_at_mpMinLatF <mailto:res_at_mpMinLatF> =
>> 27.5 ; map area
>> res_at_mpMaxLatF <mailto:res_at_mpMaxLatF> =
>> 30.7 ; map area
>> res_at_mpMinLonF <mailto:res_at_mpMinLonF> = -92.2
>> res_at_mpMaxLonF <mailto:res_at_mpMaxLonF> = -86.0
>> res_at_mpOutlineBoundarySets <mailto:res_at_mpOutlineBoundarySets> =
>> "Geophysical"
>> res_at_mpGeophysicalLineColor <mailto:res_at_mpGeophysicalLineColor> =
>> "(/255,0,0/)"
>> res_at_mpGeophysicalLineThicknessF
>> <mailto:res_at_mpGeophysicalLineThicknessF> = 3.0
>> res_at_mpNationalLineColor <mailto:res_at_mpNationalLineColor> =
>> "(/0,255,0/)"
>> res_at_mpNationalLineThicknessF
>> <mailto:res_at_mpNationalLineThicknessF> = 4.0
>> res_at_mpUSStateLineColor <mailto:res_at_mpUSStateLineColor> =
>> "Foreground"
>> res_at_mpUSStateLineDashPattern
>> <mailto:res_at_mpUSStateLineDashPattern> = "SolidLine"
>> res_at_mpUSStateLineThicknessF
>> <mailto:res_at_mpUSStateLineThicknessF> = 3.0
>> res_at_mpLandFillColor <mailto:res_at_mpLandFillColor> =
>> "white" ; set to white
>> res_at_mpShapeMode <mailto:res_at_mpShapeMode> = "FreeAspect"
>> res_at_mpFillBoundarySets <mailto:res_at_mpFillBoundarySets> =
>> "National" ; state boundaries
>>
>> ; ###############################################################
>> ; pm Stuff
>> ; ###############################################################
>> res_at_pmLabelBarOrthogonalPosF
>> <mailto:res_at_pmLabelBarOrthogonalPosF> = .06 ; move label bar down
>> ; ###############################################################
>> ; ti Stuff
>> ; ###############################################################
>> res_at_tiMainString <mailto:res_at_tiMainString> = "Northern
>> Gulf of Mexico Model Output " ; add titles
>> res_at_tiMainFontHeightF <mailto:res_at_tiMainFontHeightF> = .031
>> res_at_tiXAxisString <mailto:res_at_tiXAxisString> = "Longitude
>> (Degrees W.); [Depth from MSL] = "+Depth99(idepth)+" meters"
>> ; res_at_tiXAxisString <mailto:res_at_tiXAxisString> = "Longitude
>> (Degrees W.); [Level from Sea-Level] = 0)"
>> res_at_tiXAxisFontHeightF <mailto:res_at_tiXAxisFontHeightF> =
>> 0.027 ; resize tick
>> res_at_tiXBLabelFontHeightF <mailto:res_at_tiXBLabelFontHeightF>=
>> 0.022 ; resize tick labels
>> res_at_tiXAxisOffsetYF <mailto:res_at_tiXAxisOffsetYF> = -0.08
>> res_at_tiXAxisOffsetXF <mailto:res_at_tiXAxisOffsetXF> = 0.03
>> res_at_tiYAxisString <mailto:res_at_tiYAxisString> = "Latitude
>> (Degrees N.) "
>> res_at_tiYBLabelFontHeightF <mailto:res_at_tiYBLabelFontHeightF>= 0.022
>> res_at_tiYAxisFontHeightF <mailto:res_at_tiYAxisFontHeightF> =
>> 0.028 ; resize tick
>> res_at_tiYAxisOffsetYF <mailto:res_at_tiYAxisOffsetYF> = 0.04
>> res_at_tiYAxisOffsetXF <mailto:res_at_tiYAxisOffsetXF> = -0.07
>>
>> ; ###############################################################
>> ; tm Stuff
>> ; ###############################################################
>> res_at_txFontHeightF <mailto:res_at_txFontHeightF> = 0.02
>> ; res_at_tmYUseRight <mailto:res_at_tmYUseRight> = True
>> ; res_at_tmYRMode <mailto:res_at_tmYRMode> = "EXPLICIT"
>>
>> ; res_at_tmYLMode <mailto:res_at_tmYLMode> = False
>> res_at_tmYLMajorOutwardLengthF <mailto:res_at_tmYLMajorOutwardLengthF>= 0.0
>> res_at_tmYLMinorOutwardLengthF <mailto:res_at_tmYLMinorOutwardLengthF>= 0.0
>> res_at_tmYLValues <mailto:res_at_tmYLValues> = (/28,29,30/)
>> res_at_tmYLLabels <mailto:res_at_tmYLLabels> = "" +
>> res_at_tmYLValues <mailto:res_at_tmYLValues>
>>
>> ; res_at_tmXBMode <mailto:res_at_tmXBMode> = "Explicit"
>> ; res_at_tmXBMajorOn <mailto:res_at_tmXBMajorOn> = True
>> res_at_tmXBMajorLengthF <mailto:res_at_tmXBMajorLengthF> = 0.00
>> res_at_tmXBMinorLengthF <mailto:res_at_tmXBMinorLengthF> = 0.00
>> res_at_tmXBLabelsOn <mailto:res_at_tmXBLabelsOn> = True
>>
>>
>>
>>
>>
>>
>> res_at_tmXBValues <mailto:res_at_tmXBValues> =
>> (/-92,-91,-90,-89,-88,-87,-86/)
>> res_at_tmXBLabels <mailto:res_at_tmXBLabels> =
>> (/"92W","91W","90W","89W","88W","87W","86W"/)
>> res_at_tmXBMajorLineColor <mailto:res_at_tmXBMajorLineColor> = "red"
>> ; ###############################################################
>> ; vp Stuff
>> ; ###############################################################
>> res_at_vpWidthF <mailto:res_at_vpWidthF> = 0.65
>> res_at_vpHeightF <mailto:res_at_vpHeightF> = 0.65
>> res_at_vpXF <mailto:res_at_vpXF> = 0.15
>> res_at_vpYF <mailto:res_at_vpYF> = 0.85
>> ; T_at_missing_value <mailto:T_at_missing_value>= -99
>> T@_FillValue <mailto:T@_FillValue>= -99
>> ; plot_temp1 = gsn_csm_contour(wks,T(0,1,:,:),res)
>> ; overlay(plot_base, plot_temp1)
>> ; draw(plot_base)
>> ; frame (wks)
>> ; plot_temp2 = gsn_csm_contour(wks,T(0,2,:,:),res)
>> ; overlay(plot_base, plot_temp2)
>> ; draw(plot_base)
>> ; frame (wks)
>> ; plot_temp3 = gsn_csm_contour(wks,T(0,3,:,:),res)
>> ; overlay(plot_base, plot_temp3)
>> ; draw(plot_base)
>> ; frame (wks)
>> plot_temp99 = gsn_csm_contour(wks,T,res)
>> ; overlay(plot_base1, plot_base2)
>> overlay(plot_base1, plot_temp99)
>> draw(plot_base1)
>> frame (wks)
>> ; plot=gsn_csm_contour(wks,T,res) ; create plot
>> ; plot2=gsn_csm_contour_map_ce(wks,T(0,idepth,:,:),res) ;
>> create plot
>> ; plotlat = gsn_csm_map(wks,conres) ; create contours of apexlat
>> ; plotlon = gsn_csm_map(wks,conres) ; create contours of apexlat
>> ; overlay(plotlat,plotlon)
>> ; overlay(plot,plotlat)
>> ; draw(plot)
>> ; frame (wks)
>> ; plot_map=gsn_csm_contour_map(wks,T,res) ; create plot
>> ; plot=gsn_csm_contour_map(wks,T,res) ; create plot
>> ; genCmapMnMxSpan (wks, plot, "Blue" , "Red") ; create color map
>> end do
>> end
>> EEOOFF
>> ############################################################
>> ##
>> ## End of NCL Script
>> ##
>> ############################################################
>>
>>
>>
>> ## set Year77
>> ## set Month77
>> ## set Day77
>> ## set Hour77
>> set DepthArray = ("0.0" "2.5" "5.0" "7.5" "10.0" "15.0" "20.0"
>> "25.0" "30.0" "35.0" "40.0" "45.0" "50.0" "60.0" "70.0" "80.0"
>> "90.0" "100.0" "125.0" "150.0" "200.0" "250.0" "300.0" "400.0"
>> "500.0" "600.0" "700.0" "800.0" "900.0" "1000.0")
>> set Month77 = `printf "%02.0f" $Month77`
>> set Day77 = `printf "%02.0f" $Day77`
>> set Hour77 = `printf "%02.0f" $Hour77`
>> set local_dir = "/amber/home/jpu/GulfBreeze/"
>> set remote_dir = "/home/mccormik/GulfBreeze/"
>> set RemFileName01 =
>> "/home/mccormik/GulfBreeze/20090921Depth0000.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[1]"TEST.png"
>>
>> set LocFileName01 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[1]"TEST.png"
>>
>>
>> set RemFileName02 =
>> "/home/mccormik/GulfBreeze/20090921Depth0002.5/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[2]"TEST.png"
>>
>> set LocFileName02 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[2]"TEST.png"
>>
>>
>> set RemFileName03 =
>> "/home/mccormik/GulfBreeze/20090921Depth0005.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[3]"TEST.png"
>>
>> set LocFileName03 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[3]"TEST.png"
>>
>>
>> set RemFileName04 =
>> "/home/mccormik/GulfBreeze/20090921Depth0007.5/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[4]"TEST.png"
>>
>> set LocFileName04 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[4]"TEST.png"
>>
>>
>> set RemFileName05 =
>> "/home/mccormik/GulfBreeze/20090921Depth0010.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[5]"TEST.png"
>>
>> set LocFileName05 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[5]"TEST.png"
>>
>>
>> set RemFileName06 =
>> "/home/mccormik/GulfBreeze/20090921Depth0015.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[6]"TEST.png"
>>
>> set LocFileName06 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[6]"TEST.png"
>>
>>
>> set RemFileName07 =
>> "/home/mccormik/GulfBreeze/20090921Depth0020.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[7]"TEST.png"
>>
>> set LocFileName07 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[7]"TEST.png"
>>
>>
>> set RemFileName08 =
>> "/home/mccormik/GulfBreeze/20090921Depth0025.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[8]"TEST.png"
>>
>>
>> set LocFileName08 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[8]"TEST.png"
>>
>>
>> set RemFileName09 =
>> "/home/mccormik/GulfBreeze/20090921Depth0030.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[9]"TEST.png"
>>
>> set LocFileName09 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[9]"TEST.png"
>>
>> set RemFileName10 =
>> "/home/mccormik/GulfBreeze/20090921Depth0035.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[10]"TEST.png"
>>
>> set LocFileName10 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[10]"TEST.png"
>>
>>
>> set RemFileName11 =
>> "/home/mccormik/GulfBreeze/20090921Depth0040.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[11]"TEST.png"
>>
>> set LocFileName11 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[11]"TEST.png"
>>
>>
>> set RemFileName12 =
>> "/home/mccormik/GulfBreeze/20090921Depth0045.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[12]"TEST.png"
>>
>> set LocFileName12 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[12]"TEST.png"
>>
>>
>> set RemFileName13 =
>> "/home/mccormik/GulfBreeze/20090921Depth0050.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[13]"TEST.png"
>>
>> set LocFileName13 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[13]"TEST.png"
>>
>>
>> set RemFileName14 =
>> "/home/mccormik/GulfBreeze/20090921Depth0060.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[14]"TEST.png"
>>
>> set LocFileName14 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[14]"TEST.png"
>>
>>
>> set RemFileName15 =
>> "/home/mccormik/GulfBreeze/20090921Depth0070.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[15]"TEST.png"
>>
>> set LocFileName15 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[15]"TEST.png"
>>
>>
>> set RemFileName16 =
>> "/home/mccormik/GulfBreeze/20090921Depth0080.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[16]"TEST.png"
>>
>> set LocFileName16 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[16]"TEST.png"
>>
>>
>> set RemFileName17 =
>> "/home/mccormik/GulfBreeze/20090921Depth0090.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[17]"TEST.png"
>>
>> set LocFileName17 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[17]"TEST.png"
>>
>>
>>
>> set RemFileName18 =
>> "/home/mccormik/GulfBreeze/20090921Depth0100.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[18]"TEST.png"
>>
>> set LocFileName18 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[18]"TEST.png"
>>
>>
>> set RemFileName19 =
>> "/home/mccormik/GulfBreeze/20090921Depth0125.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[19]"TEST.png"
>>
>> set LocFileName19 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[19]"TEST.png"
>>
>>
>> set RemFileName20 =
>> "/home/mccormik/GulfBreeze/20090921Depth0150.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[20]"TEST.png"
>>
>> set LocFileName20 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[20]"TEST.png"
>>
>>
>> set RemFileName21 =
>> "/home/mccormik/GulfBreeze/20090921Depth0200.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[21]"TEST.png"
>>
>> set LocFileName21 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[21]"TEST.png"
>>
>>
>> set RemFileName22 =
>> "/home/mccormik/GulfBreeze/20090921Depth0250.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[22]"TEST.png"
>>
>> set LocFileName22 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[22]"TEST.png"
>>
>>
>> set RemFileName23 =
>> "/home/mccormik/GulfBreeze/20090921Depth0300.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[23]"TEST.png"
>>
>> set LocFileName23 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[23]"TEST.png"
>>
>>
>> set RemFileName24 =
>> "/home/mccormik/GulfBreeze/20090921Depth0400.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[24]"TEST.png"
>>
>> set LocFileName24 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[24]"TEST.png"
>>
>>
>> set RemFileName25 =
>> "/home/mccormik/GulfBreeze/20090921Depth0500.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[25]"TEST.png"
>>
>> set LocFileName25 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[25]"TEST.png"
>>
>>
>> set RemFileName26 =
>> "/home/mccormik/GulfBreeze/20090921Depth0600.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[26]"TEST.png"
>>
>> set LocFileName26 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[26]"TEST.png"
>>
>>
>>
>> set RemFileName27 =
>> "/home/mccormik/GulfBreeze/20090921Depth0700.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[27]"TEST.png"
>>
>> set LocFileName27 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[27]"TEST.png"
>>
>>
>> set RemFileName28 =
>> "/home/mccormik/GulfBreeze/20090921Depth0800.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[28]"TEST.png"
>>
>> set LocFileName28 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[28]"TEST.png"
>>
>>
>> set RemFileName29 =
>> "/home/mccormik/GulfBreeze/20090921Depth0900.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[29]"TEST.png"
>>
>> set LocFileName29 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[29]"TEST.png"
>>
>>
>> set RemFileName30 =
>> "/home/mccormik/GulfBreeze/20090921Depth1000.0/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[30]"TEST.png"
>>
>> set LocFileName30 =
>> "/amber/home/jpu/GulfBreeze/t3d_"$Year77$Month77$Day77$Hour77"_nc_ascii"$DepthArray[30]"TEST.png"
>>
>>
>> /usr/bin/sftp mccormik_at_palm.nesc.epa.gov
>> <mailto:mccormik_at_palm.nesc.epa.gov><<EOF09
>> bin
>> hash
>> bell
>> put $LocFileName01 $RemFileName01
>> put $LocFileName02 $RemFileName02
>> put $LocFileName03 $RemFileName03
>> put $LocFileName04 $RemFileName04
>> put $LocFileName05 $RemFileName05
>> put $LocFileName06 $RemFileName06
>> put $LocFileName07 $RemFileName07
>> put $LocFileName08 $RemFileName08
>> put $LocFileName09 $RemFileName09
>> put $LocFileName10 $RemFileName10
>> put $LocFileName11 $RemFileName11
>> put $LocFileName12 $RemFileName12
>> put $LocFileName13 $RemFileName13
>> put $LocFileName14 $RemFileName14
>> put $LocFileName15 $RemFileName15
>> put $LocFileName16 $RemFileName16
>> put $LocFileName17 $RemFileName17
>> put $LocFileName18 $RemFileName18
>> put $LocFileName19 $RemFileName19
>> put $LocFileName20 $RemFileName20
>> put $LocFileName21 $RemFileName21
>> put $LocFileName22 $RemFileName22
>> put $LocFileName23 $RemFileName23
>> put $LocFileName24 $RemFileName24
>> put $LocFileName25 $RemFileName25
>> put $LocFileName26 $RemFileName26
>> put $LocFileName27 $RemFileName27
>> put $LocFileName28 $RemFileName28
>> put $LocFileName29 $RemFileName29
>> put $LocFileName30 $RemFileName30
>> bye
>> EOF09
>> exit(99)
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> ncl-talk mailing list
>> List instructions, subscriber options, unsubscribe:
>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
> --
> --------------------------------------------------------------
> Adam Phillips asphilli_at_ucar.edu
> National Center for Atmospheric Research tel: (303) 497-1726
> ESSL/CGD/CAS fax: (303) 497-1333
> P.O. Box 3000
> Boulder, CO 80307-3000 http://www.cgd.ucar.edu/cas/asphilli
> _______________________________________________
> ncl-talk mailing list
> List instructions, subscriber options, unsubscribe:
> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
_______________________________________________
ncl-talk mailing list
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
Received on Thu Sep 24 2009 - 11:39:32 MDT
This archive was generated by hypermail 2.2.0 : Thu Sep 24 2009 - 13:55:09 MDT