Re: Single color panel plots output

Hi Mary,

I was using "BlWhRe" color plate. The variance in plots were confined to from -0.5 to -0.25, the reason being only single color. When i defined my own four colors with custom ranges it worked fine. The only problem i have is to loop files at f1. Can you please look into it and suggest what is wrong. Thanks.
The full script is as follows:

load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
>>load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
>>load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
>>load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/shea_util.ncl"
>> do i =5,7
>> filename = "6104_pksec_"+sprinti("%0.2i",i)+".nc"
>> print(filename)
>> f1 = addfile(filename,"r")
>> end do
>>
>>
>> f1 = addfile("6104_pksec_05.nc","r")
>> f2 = addfile("6104_pk_june_avg.nc","r")
>> x1 = f1->a(lat|:,lon|:,time|:)
>> x2 = f2->a
>> x1!0="lat"
>> x1!1="lon"
>> x1&lat@units="degrees_north"
>> x1&lon@units="degrees_east"
>> c = escorc(x2,x1)
>> copy_VarCoords(x1,c)
>> printVarSummary(c)
>>
>>
>> wks = gsn_open_wks ("x11","pksec_pk_06_panel") ; open ps file
>> plot = new(3,graphic)
>> gsn_define_colormap(wks,"BlWhRe")
>> res = True
>> resP = True
>> res@gsnDraw = False ; Don't draw plots
>> res@gsnFrame = False ; Don't advance frames
>> res@cnFillOn = True
>> res@cnLinesOn = False
>>
>>
>> res@mpOutlineBoundarySets = "AllBoundaries"
>> res@mpDataBaseVersion = "MediumRes"
>> res@mpDataSetName = "Earth..3"
>> res@mpOutlineOn = True
>> res@mpFillOn = False
>> res@mpMaxLatF = 37
>> res@mpMinLatF = 7
>> res@mpMaxLonF = 125
>> res@mpMinLonF = 60
>>
>>
>> res@cnLevelSelectionMode = "ManualLevels" ; manually set cn levels
>> res@cnMinLevelValF = -1. ; min level
>> res@cnMaxLevelValF = 1. ; max level
>> res@cnLevelSpacingF = .25 ; contour level spacing
>> res@tiMainFontHeightF = 0.03
>> res@gsnAddCyclic = False
>> do i=0,2
>> plot(i) = gsn_csm_contour_map_ce(wks,c,res)
>> end do
>>
>>
>> pres = True ; Set panel resources
>> pres@gsmMaximize = True ; Maximize plots in panel
>> pres@gsnPanelLabelBar = True ; Turn on panel labelbal
>> pres@pmLabelBarWidthF = 0.8 ; Change labelbar width
>>
>>
>> gsn_panel(wks,plot,(/3,1/),pres)

>

________________________________
From: Mary Haley <haley@ucar.edu>
To: Ibo Ze <ibo85@ymail.com>
Cc: Ncl Talk <ncl-talk@ucar.edu>
Sent: Fri, April 30, 2010 10:06:49 AM
Subject: Re: Single color panel plots output

Your values seem to look okay, but I'm not sure which values below correspond to which of your
variables.

Can you give me your full script and data so I can run it here?

Please see:

http://www.ncl.ucar.edu/report_bug.shtml

for information on where to put the files.

Thanks,

--Mary

On Apr 29, 2010, at 9:45 AM, Ibo Ze wrote:

Hi Mary,
>
>
>You are right. I think am missing something in first few lines of script. The following output i got for x1 and c using print:
>
>
>
>
>Variable: filename
>Type: string
>Total Size: 8 bytes
> 1 values
>Number of Dimensions: 1
>Dimensions and sizes: [1]
>Coordinates:
>(0) 6104_pksec_05.nc
>
>
>
>
>Variable: filename
>Type: string
>Total Size: 8 bytes
> 1 values
>Number of Dimensions: 1
>Dimensions and sizes: [1]
>Coordinates:
>(0) 6104_pksec_06.nc
>
>
>
>
>Variable: filename
>Type: string
>Total Size: 8 bytes
> 1 values
>Number of Dimensions: 1
>Dimensions and sizes: [1]
>Coordinates:
>(0) 6104_pksec_07.nc
>(0) 0
>(0) 62.79183
>(0) 0.1176416
>(0) 1.319832
>(0) -0.3797857
>(0) 0.529642
>
>
>Variable: c
>Type: float
>Total Size: 124800 bytes
> 31200 values
>Number of Dimensions: 2
>Dimensions and sizes: [lat | 120] x [lon | 260]
>Coordinates:
> lat: [7.125..36.875]
> lon: [60.125..124.875]
>Number Of Attributes: 1
> _FillValue : -999
>
>
>
________________________________
From: Mary Haley <haley@ucar.edu>
>To: Ibo Ze <ibo85@ymail.com>
>Cc: Ncl Talk <ncl-talk@ucar.edu>
>Sent: Thu, April 29, 2010 7:18:20 AM
>Subject: Re: Single color panel plots output
>
>Hi,
>
>
>A single color color plot may happen if you have a data field that is all equal to one value.
>
>
>Look at your "c" array. What do the values look like?
>
>
>print(min(c))
>print(max(c))
>
>
>You may want to do the same for x1 and x2, to make sure what you read off the files is correct.
>
>
>--Mary
>
>
>On Apr 29, 2010, at 1:42 AM, Ibo Ze wrote:
>
>Hi,
>>
>>
>>I am doing cross-correlation and getting single color output panel plots. The immediate cause is not apparent to me. Can anyone please help to rectify this. Thanks.
>>Script is as follows:
>>
>>
>>load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
>>load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
>>load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
>>load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/shea_util.ncl"
>> do i =5,7
>> filename = "6104_pksec_"+sprinti("%0.2i",i)+".nc"
>> print(filename)
>> f1 = addfile(filename,"r")
>> end do
>>
>>
>> f1 = addfile("6104_pksec_05.nc","r")
>> f2 = addfile("6104_pk_june_avg.nc","r")
>> x1 = f1->a(lat|:,lon|:,time|:)
>> x2 = f2->a
>> x1!0="lat"
>> x1!1="lon"
>> x1&lat@units="degrees_north"
>> x1&lon@units="degrees_east"
>> c = escorc(x2,x1)
>> copy_VarCoords(x1,c)
>> printVarSummary(c)
>>
>>
>> wks = gsn_open_wks ("x11","pksec_pk_06_panel") ; open ps file
>> plot = new(3,graphic)
>> gsn_define_colormap(wks,"BlWhRe")
>> res = True
>> resP = True
>> res@gsnDraw = False ; Don't draw plots
>> res@gsnFrame = False ; Don't advance frames
>> res@cnFillOn = True
>> res@cnLinesOn = False
>>
>>
>> res@mpOutlineBoundarySets = "AllBoundaries"
>> res@mpDataBaseVersion = "MediumRes"
>> res@mpDataSetName = "Earth..3"
>> res@mpOutlineOn = True
>> res@mpFillOn = False
>> res@mpMaxLatF = 37
>> res@mpMinLatF = 7
>> res@mpMaxLonF = 125
>> res@mpMinLonF = 60
>>
>>
>> res@cnLevelSelectionMode = "ManualLevels" ; manually set cn levels
>> res@cnMinLevelValF = -1. ; min level
>> res@cnMaxLevelValF = 1. ; max level
>> res@cnLevelSpacingF = .25 ; contour level spacing
>> res@tiMainFontHeightF = 0.03
>> res@gsnAddCyclic = False
>> do i=0,2
>> plot(i) = gsn_csm_contour_map_ce(wks,c,res)
>> end do
>>
>>
>> pres = True ; Set panel resources
>> pres@gsmMaximize = True ; Maximize plots in panel
>> pres@gsnPanelLabelBar = True ; Turn on panel labelbal
>> pres@pmLabelBarWidthF = 0.8 ; Change labelbar width
>>
>>
>> gsn_panel(wks,plot,(/3,1/),pres)
>>
>>
>>_______________________________________________
>>ncl-talk mailing list
>>List instructions, subscriber options, unsubscribe:
>>http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>
>
>_______________________________________________
>ncl-talk mailing list
>List instructions, subscriber options, unsubscribe:
>http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>

      
Received on Sat May 1 03:41:18 2010