Dear Mary,
Really thanks for your reply. The problem has been solved. Really thanks
for that.
Regards,
Sophie
On Tue, Jul 10, 2012 at 12:16 AM, Mary Haley <haley@ucar.edu> wrote:
> Sophie,
>
> Does this cause a seg fault?
>
> ng4ex -W ps xy01n -clean
>
> If not, then my suspicion is that you are running NCL from a Cygwin
> window, and not from an X/Cygwin window. This is necessary in order to have
> the graphical output displayed to the screen. You can try starting an
> X/Cygwin window, by typing the following from your Cygwin window:
>
> startxwin
>
> If it says that startxwin doesn't exist, then you will need to run your
> "setup.exe" again and make sure this gets installed.
>
> If this still doesn't fix the problem, then double-check your version of
> "setup.exe". As mentioned on this page:
>
> http://www.ncl.ucar.edu/Download/cygwin.shtml
>
> You must be running at least version 2.738 of "setup.exe".
>
> A final thing that seemed to fix the issue is to reboot the Windows
> machine after you run setup.exe. I had to do that on my home machine just
> last week.
>
> --Mary
>
> On Jul 9, 2012, at 10:05 AM, Sophie HE wrote:
>
> > Hi Mary,
> >
> > My version of NCL is 6.1.0-beta.
> > When running ng4ex gsun01n -clean , it also cause a seg fault.
> > I used the downloaded library:
> ncl_ncarg-6.1.0-beta.CYGWIN_NT-6.1-WOW64_i686.tar.gz
> > My Cygwin is the latest version in the website.
> >
> > Thanks very much for your reply.
> >
> > Regards,
> > Sophie
> >
> > On Mon, Jul 9, 2012 at 11:51 PM, Mary Haley <haley@ucar.edu> wrote:
> > Sophie,
> >
> > It sounds like something is wrong with your Cygwin installation. I need
> more information.
> >
> > What version of NCL are you running?
> >
> > ncl -V
> >
> > Does this cause a seg fault:
> >
> > ng4ex gsun01n -clean
> >
> > If this works, it will pop up a window on your screen, which you need to
> click on with your left mouse button.
> >
> > Did you download a precompiled NCL binary for Cygwin, or did you build
> it from source code?
> > How old is your version of Cygwin?
> >
> > --Mary
> >
> >
> > On Jul 8, 2012, at 9:37 PM, Sophie HE wrote:
> >
> > > Hi there,
> > >
> > > Whenever I would love to open an workstation using gsn_open_wks, even
> with the simplest command, say
> > > load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
> > > wks = gsn_open_wks("x11","gsun01n")
> > > cygwin reports Segmentation fault (core dumped) error.
> > >
> > > Could you give me any advice, as I really have no idea of what's going
> on?
> > >
> > > Thanks.
> > >
> > > Regards,
> > > Sophie
> > >
> > >
> > > On Sun, Jul 8, 2012 at 2:00 AM, <ncl-talk-request@ucar.edu> wrote:
> > > Send ncl-talk mailing list submissions to
> > > ncl-talk@ucar.edu
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> > > or, via email, send a message with subject or body 'help' to
> > > ncl-talk-request@ucar.edu
> > >
> > > You can reach the person managing the list at
> > > ncl-talk-owner@ucar.edu
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of ncl-talk digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. Re: Stripping white space at the edges (Paul Scorer)
> > > 2. Re: Problem with spacing between plots in a panel plot
> > > (Adam Phillips)
> > > 3. eof function (163)
> > > 4. Re: Stripping white space at the edges (Brandon Capasso)
> > > 5. Dimension mismatch on dim_sum_n the dimension relating to
> > > file input (Cannavina, Dominique)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Fri, 06 Jul 2012 23:54:26 +0100
> > > From: Paul Scorer <paul.scorer01@gmail.com>
> > > Subject: Re: Stripping white space at the edges
> > > To: Dennis Shea <shea@ucar.edu>
> > > Cc: NCL Talk <ncl-talk@ucar.edu>
> > > Message-ID: <1341615266.4491.7.camel@hp-compaq.home>
> > > Content-Type: text/plain; charset="UTF-8"
> > >
> > > On recent-ish Linux systems, there is available a fork of ImageMagick
> > > known as GraphicsMagick which is significantly faster, particularly on
> > > multi-core h/w.
> > >
> > > Use thus:
> > > $ gm convert ...
> > > etc
> > >
> > > Options, etc are (essentially) the same.
> > >
> > > HTH
> > >
> > > PaulS
> > >
> > >
> > > On Fri, 2012-07-06 at 10:39 -0600, Dennis Shea wrote:
> > > > the following may be overkill but
> > > >
> > > > convert -flatten -trim +repage -background white
> > > > pr_zonalAvg_clim7100.png pr_zonalAvg_clim7100.trim.png
> > > >
> > > >
> > > > On 07/06/2012 10:34 AM, Noel Aloysius wrote:
> > > > > Hello NCL,
> > > > >
> > > > > I created a panel plot with 14 figures. I want to maximize the
> plot area
> > > > > by stripping the white space at the edges. I am not sure which plot
> > > > > resources do this.
> > > > > The section of the code and the plot is attached.
> > > > >
> > > > > Thank you in advance for your help,
> > > > > Noel
> > > > >
> > > > >
> ;***********************************************************************************************
> > > > > wks = gsn_open_wks("png", diro + "pr_zonalAvg")
> > > > > plot = new(14, graphic)
> > > > > gsn_define_colormap(wks, "precip3_16lev")
> > > > >
> > > > > res1 = True ; plot mods
> desired
> > > > > res1@gsnDraw = False
> > > > > res1@gsnFrame = False
> > > > > res1@gsnMaximize = True
> > > > > res1@gsnRightStringFontHeightF = 0.04
> > > > > res1@cnFillOn = True ; turn on
> color
> > > > > res1@gsnSpreadColors = True ; use full
> color table
> > > > > res1@cnLinesOn = False ; no contour
> lines
> > > > > res1@cnInfoLabelOn = False
> > > > > res1@pmTickMarkDisplayMode = "Always" ; turn on fancy
> tickmarks
> > > > >
> > > > > res1@tmXBMode = "Explicit" ; label
> independently
> > > > > res1@tmXBValues = ispan(0,11,1)
> > > > > res1@tmXBLabels =
> > > > > (/"J","F","M","A","M","J","J","A","S","O","N","D"/)
> > > > >
> > > > > res1@lbLabelBarOn = False
> > > > > res1@cnLevelSelectionMode = "ManualLevels"
> > > > > res1@cnLevelSpacingF = 20.
> > > > > res1@cnMinLevelValF = 20.
> > > > > res1@cnMaxLevelValF = 300.
> > > > >
> > > > > res1@tmYROn = False
> > > > > res1@tmXBLabelFontHeightF = 0.025
> > > > > res1@tmYLLabelFontHeightF = 0.025
> > > > >
> > > > > do i=0,11
> > > > > res1@gsnRightString = gcm_names(i)
> > > > > plot(i) = gsn_csm_lat_time(wks,
> > > > > PzoneLat_7100(raw_bc|0,GCM|i,lat|:,month|:), res1)
> > > > > end do
> > > > >
> > > > > res1@gsnRightString = "Obs"
> > > > > plot(12) = gsn_csm_lat_time(wks,
> PzoneLat_7100obs(lat|:,month|:), res1)
> > > > >
> > > > > res1@gsnRightString = "bias corr. GCM avg."
> > > > > plot(13) = gsn_csm_lat_time(wks,
> PzoneLat_7100_BCavg(lat|:,month|:),
> > > > > res1)
> > > > >
> > > > > pres1 = True
> > > > > pres1@gsnPanelLabelBar = True
> > > > > pres1@gsnFrame = False
> > > > > pres1@lbLabelFontHeightF = 0.01
> > > > > pres1@lbOrientation = "horizontal"
> > > > > pres1@lbLabelAutoStride = True
> > > > > pres1@gsnPanelYWhiteSpacePercent = 1.5
> > > > > pres1@gsnBoxMargin = 0.0
> > > > > pres1@gsnPanelRowSpec = True ; tell panel
> what order
> > > > > to plot
> > > > > pres1@gsnPanelCenter = True ; centered plot
> > > > > pres1@gsnMaximize = True
> > > > >
> > > > > gsn_panel(wks,plot,(/6,6,2/),pres1)
> > > > > frame(wks)
> > > > >
> ;****************************************************************************************************
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > ncl-talk mailing list
> > > > > List instructions, subscriber options, unsubscribe:
> > > > > http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> > > >
> > > > _______________________________________________
> > > > ncl-talk mailing list
> > > > List instructions, subscriber options, unsubscribe:
> > > > http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> > >
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Fri, 6 Jul 2012 18:41:19 -0600
> > > From: Adam Phillips <asphilli@ucar.edu>
> > > Subject: Re: Problem with spacing between plots in a panel
> > > plot
> > > To: Soumik Basu <sbasu@iarc.uaf.edu>
> > > Cc: Ncl Talk <ncl-talk@ucar.edu>
> > > Message-ID: <CCB59B1E-4C9D-40E9-A79C-4B02574960E1@ucar.edu>
> > > Content-Type: text/plain; charset=us-ascii
> > >
> > > Hi Soumik,
> > > When you are paneling plots, it is recommended that you do not set
> gsnMaximize = True in your individual plot resource lists. (res and sres in
> your case) It is of course fine to set gsnMaximize in the panel resource
> list. Try removing gsnMaximize from your res and sres resource lists and
> see if that helps... Adam
> > >
> > >
> > >
> > > On Jul 6, 2012, at 3:58 PM, Soumik Basu <sbasu@iarc.uaf.edu> wrote:
> > >
> > > > Hi Adam,
> > > >
> > > > Thanks for the reply.I made those changes but I am still getting the
> similar plots. Can you please suggest what else can cause it. here is the
> complete plotting resources:
> > > >
> > > >
> > > > ;*******************************************************
> > > > ;Plot resources for eady growth first set (non shaded)
> > > > ;******************************************************
> > > >
> > > > wks =
> gsn_open_wks("png","eady_eke_var_diff_spring_winter")
> > > > gsn_define_colormap(wks,"BlAqGrYeOrReVi200")
> > > >
> > > >
> > > > res = True
> > > > res@cnLinesOn = True
> > > >
> > > > res@tmLabelAutoStride = True
> > > >
> > > > res@tmXTOn = False
> > > > res@tmYROn = False
> > > >
> > > > res@cnLevelSelectionMode = "ManualLevels"
> > > > res@cnMinLevelValF = 0
> > > > res@cnMaxLevelValF = 2.0
> > > > res@cnLevelSpacingF = 0.2
> > > > res@cnLineLabelFontHeightF= 0.015
> > > > res@cnInfoLabelOn = False ; turn off
> cn info label
> > > > res@cnLineLabelsOn = False
> > > >
> > > > res@lbLabelBarOn = False
> > > >
> > > > res@gsnDraw = False
> > > > res@gsnFrame = False
> > > > res@gsnMaximize = True
> > > >
> > > > res@pmLabelBarDisplayMode = "Never"
> > > >
> > > > ;*************************************************
> > > > ; Plot resources for eke first set (shaded)
> > > > ;*************************************************
> > > > plot = new(4,graphic) ; create a plot array
> > > >
> > > > sres = True
> > > >
> > > > sres@gsnDraw = False
> > > > sres@gsnFrame = False
> > > > sres@gsnMaximize = True
> > > > sres@gsnSpreadColors = True
> > > >
> > > > sres@cnFillOn = True
> > > > sres@cnLinesOn = False
> > > > sres@cnLevelSelectionMode = "ManualLevels"
> > > > sres@cnMinLevelValF = 0
> > > > sres@cnMaxLevelValF = 250
> > > > sres@cnLevelSpacingF = 5
> > > > sres@cnInfoLabelOn = False ;
> turn off cn info label
> > > > sres@cnLineLabelsOn = False
> > > >
> > > > sres@tmLabelAutoStride = True
> > > > sres@tmXTOn = False
> > > > sres@tmYROn = False
> > > >
> > > > sres@mpLimitMode = "LatLon"
> > > > sres@mpMinLatF = 10.
> > > > sres@mpMaxLatF = 80.
> > > > sres@mpMinLonF = 130.
> > > > sres@mpMaxLonF = 330.
> > > > sres@mpGeophysicalLineThicknessF = 1.75
> > > > sres@mpCenterLonF = 210
> > > > sres@mpShapeMode = "FreeAspect"
> > > > sres@lbOrientation = "vertical" ;vertical label bar
> > > > sres@lbLabelBarOn = False
> > > > sres@lbLabelAutoStride = True
> > > >
> > > >
> > > > ;*********************************
> > > > ; Plot first set (four means)
> > > > ;*********************************
> > > >
> > > > plot_eke1 = gsn_csm_contour_map(wks,eke_var(:,:),sres)
> > > > plot_eady1 = gsn_csm_contour(wks,eady_var(:,:),res)
> > > > overlay(plot_eke1,plot_eady1)
> > > > plot(0) = plot_eke1
> > > >
> > > > plot_eke2 = gsn_csm_contour_map(wks,eke_var_ens(:,:),sres)
> > > > plot_eady2 = gsn_csm_contour(wks,eady_var_ens(:,:),res)
> > > > overlay(plot_eke2,plot_eady2)
> > > > plot(1) = plot_eke2
> > > >
> > > > res@gsnLeftString = " "
> > > >
> > > > plot_eke3 = gsn_csm_contour_map(wks,eke_var1(:,:),sres)
> > > > plot_eady3 = gsn_csm_contour(wks,eady_var1(:,:),res)
> > > > overlay(plot_eke3,plot_eady3)
> > > > plot(2) = plot_eke3
> > > >
> > > > plot_eke4 = gsn_csm_contour_map(wks,eke_var_ens1(:,:),sres)
> > > > plot_eady4 = gsn_csm_contour(wks,eady_var_ens1(:,:),res)
> > > > overlay(plot_eke4,plot_eady4)
> > > > plot(3) = plot_eke4
> > > >
> > > > ;************************************************
> > > > ; create first set panel plot(four means)
> > > > ;************************************************
> > > > resPanel = True
> > > >
> > > > resPanel@gsnFrame = False
> > > >
> > > > resPanel@gsnSpreadColors = True
> > > > resPanel@gsnPanelLabelBar = True
> ; add color bar
> > > > resPanel@gsnPanelFigureStrings = (/"a","b","c","d"/)
> > > > resPanel@gsnPanelFigureStringsFontHeightF = 0.02
> > > > resPanel@gsnPanelFigureStringsPerimOn = True
> > > > resPanel@gsnPanelDebug = True
> > > > resPanel@gsnPanelTop = 0.9
> > > > resPanel@gsnPanelBottom = 0.3 ;move
> bottom up from 0 to 0.4
> > > > resPanel@gsnPanelLeft = 0.0
> > > > resPanel@gsnPanelRight = 0.9
> > > > resPanel@gsnPanelDebug = True
> > > >
> > > > resPanel@lbOrientation = "Vertical"
> > > > resPanel@lbLabelAutoStride = False
> > > > resPanel@lbLabelStride = 5
> > > >
> > > > gsn_panel(wks,plot,(/2,2/),resPanel)
> > > >
> > > > ;*****************************************************************
> > > > ; create plot resources eady growth diff next set of plots(non
> shaded)
> > > > ;*****************************************************************
> > > > plot1 = new(2,graphic) ; create a plot
> array
> > > >
> > > > dres = True
> > > >
> > > > dres@gsnMaximize = True
> > > >
> > > >
> > > > dres@cnLinesOn = True
> > > > dres@cnLevelSelectionMode = "ManualLevels"
> > > > dres@cnMinLevelValF = 0
> > > > dres@cnMaxLevelValF = 3
> > > > dres@cnLevelSpacingF = 0.2
> > > > dres@cnInfoLabelOn = False
> > > > dres@cnLineLabelsOn = False
> > > > dres@cnLineLabelDensityF = 1.
> > > > dres@cnLineLabelFontHeightF = 0.015
> > > > dres@cnLineLabelInterval = 3
> > > >
> > > > dres@tmLabelAutoStride = True
> > > > dres@tmXTOn = False
> > > > dres@tmYROn = False
> > > >
> > > > dres@lbLabelBarOn = False
> > > >
> > > > dres@gsnDraw = False
> > > > dres@gsnFrame = False
> > > > dres@gsnMaximize = True
> > > >
> > > >
> > > > ;*****************************************************
> > > > ; create plot resources eke next set of plots(shaded)
> > > > ;******************************************************
> > > >
> > > > dbres = True
> > > >
> > > > dbres@gsnMaximize = True
> > > > dbres@gsnSpreadColors = True
> > > > dbres@gsnDraw = False
> > > > dbres@gsnFrame = False
> > > >
> > > > dbres@cnFillOn = True
> > > > dbres@cnLinesOn = False
> > > > dbres@cnLevelSelectionMode = "ManualLevels"
> > > > dbres@cnMinLevelValF = -40
> > > > dbres@cnMaxLevelValF = 40
> > > > dbres@cnLevelSpacingF = 0.5
> > > > dbres@cnInfoLabelOn = False
> > > > dbres@cnLineLabelsOn = False
> > > >
> > > >
> > > > dbres@tmLabelAutoStride = True
> > > > dbres@tmXTOn = False
> > > > dbres@tmYROn = False
> > > >
> > > > dbres@lbOrientation = "Vertical"
> > > > dbres@lbLabelBarOn = False
> > > > dbres@lbLabelStride = 20.
> > > > dbres@lbLabelAutoStride = False
> > > >
> > > > dbres@mpLimitMode = "LatLon"
> > > > dbres@mpMinLatF = 10.
> > > > dbres@mpMaxLatF = 80.
> > > > dbres@mpMinLonF = 130.
> > > > dbres@mpMaxLonF = 330.
> > > > dbres@mpCenterLonF = 210
> > > > dbres@mpGeophysicalLineThicknessF= 1.75
> > > >
> > > > getvalues plot(3)
> > > > "vpWidthF" : vpw
> > > > "vpHeightF" : vph
> > > > end getvalues
> > > >
> > > >
> > > > ; By default, you can't skew the width/height of a map plot.
> > > > ; You must also set mpShapeMode to "FreeAspect" to indicate
> > > > ; that you really want to skew the map.
> > > >
> > > > dbres@mpShapeMode = "FreeAspect"
> > > > dbres@vpWidthF = vpw
> > > > dbres@vpHeightF = vph
> > > >
> > > >
> > > > ; ## SHADED
> > > >
> > > > plot1_eke1 = gsn_csm_contour_map(wks,eke_diff,dbres)
> > > > plot1_eke2 =
> gsn_csm_contour_map(wks,eke_diff1,dbres)
> > > >
> > > > ; ## NON-SHADED
> > > >
> > > > plot1_eady1 = gsn_csm_contour(wks,eady_diff,dres)
> > > > plot1_eady2 = gsn_csm_contour(wks,eady_diff1,dres)
> > > >
> > > > overlay(plot1_eke1,plot1_eady1)
> > > > overlay(plot1_eke2,plot1_eady2)
> > > >
> > > > plot1(0) = plot1_eke1
> > > > plot1(1) = plot1_eke2
> > > >
> > > >
> > > >
> > > > ;************************************************
> > > > ; create next set panel plot
> > > > ;************************************************
> > > > dresPanel = True
> > > >
> > > > dresPanel@gsnFrame = False
> > > > dresPanel@gsnSpreadColors = True
> > > > dresPanel@gsnMaximize = True
> ; use full page
> > > > dresPanel@gsnPanelLabelBar = True
> ; add color bar
> > > > dresPanel@gsnPanelTop = 0.45
> > > > dresPanel@gsnPanelBottom = 0.1
> > > > dresPanel@gsnPanelLeft = 0.0
> > > > dresPanel@gsnPanelRight = 0.9
> > > > dresPanel@gsnPanelFigureStrings = (/"e","f"/)
> > > > dresPanel@gsnPanelFigureStringsFontHeightF = 0.02
> > > > dresPanel@gsnPanelFigureStringsPerimOn = True
> > > > dresPanel@gsnPanelDebug = True
> > > >
> > > > dresPanel@lbOrientation = "Vertical"
> > > > dresPanel@lbLabelAutoStride = False
> > > > dresPanel@lbLabelStride = 10
> > > >
> > > > gsn_panel (wks,plot1,(/1,2/),dresPanel)
> > > >
> > > > frame(wks)
> > > >
> > > >
> > > >
> > > > Thanks,
> > > > Soumik
> > > >
> > > >
> > > > On 2012-07-05 19:20, Adam Phillips wrote:
> > > >> Hi Soumik,
> > > >> Your top 4 plots are not taking up all of the space you are
> allotting
> > > >> to them. They are maxed out on the page horizontally, and they are
> > > >> only taking up roughly 0.5-0.9 of vertical NDC space. To take up
> more
> > > >> space, NCL would need to alter the aspect ratio of the plot(s),
> > > >> something it won't do unless you tell it to. (Setting
> res@mpShapeMode=
> > > >> "FreeAspect" would do that. )
> > > >>
> > > >> Try setting gsnPanelTop for your bottom 2 plots to 0.45 (instead of
> 0.3)..
> > > >> Hope that helps.. Adam
> > > >>
> > > >>
> > > >> On Jul 5, 2012, at 6:21 PM, Soumik Basu <sbasu@iarc.uaf.edu> wrote:
> > > >>
> > > >>> Hi,
> > > >>>
> > > >>> I am trying to create a panel plot containing 6 plots. But I am
> having
> > > >>> problem with the space between the plots.I am plotting the first
> four
> > > >>> plots with a particular colorbar and the last two with another
> colorbar.
> > > >>> Can anybody please suggest me what is going wrong.
> > > >>>
> > > >>> The panel plot resources (I am sending only the two separate
> resource
> > > >>> parts of my script) I am using are as follows:
> > > >>>
> > > >>> ;************************************************
> > > >>> ; create first set panel plot(top four of the panel)
> > > >>> ;************************************************
> > > >>> resPanel = True
> > > >>>
> > > >>> resPanel@gsnFrame = False
> > > >>>
> > > >>> resPanel@gsnSpreadColors = True
> > > >>> resPanel@gsnPanelLabelBar = True
> ; add
> > > >>> color bar
> > > >>> resPanel@gsnPanelFigureStrings = (/"a","b","c","d"/)
> > > >>> resPanel@gsnPanelFigureStringsFontHeightF = 0.02
> > > >>> resPanel@gsnPanelFigureStringsPerimOn = True
> > > >>> resPanel@gsnPanelDebug = True
> > > >>> resPanel@gsnPanelTop = 0.9
> > > >>> resPanel@gsnPanelBottom = 0.3 ;move
> bottom up
> > > >>> from 0 to 0.4
> > > >>> resPanel@gsnPanelLeft = 0.0
> > > >>> resPanel@gsnPanelRight = 0.9
> > > >>> resPanel@gsnPanelDebug = True
> > > >>>
> > > >>> resPanel@lbOrientation = "Vertical"
> > > >>> resPanel@lbLabelAutoStride = False
> > > >>> resPanel@lbLabelStride = 5
> > > >>>
> > > >>> gsn_panel(wks,plot,(/2,2/),resPanel)
> > > >>>
> > > >>> ;************************************************
> > > >>> ; create last 2 of panel plot
> > > >>> ;************************************************
> > > >>> dresPanel = True
> > > >>>
> > > >>> dresPanel@gsnFrame = False
> > > >>> dresPanel@gsnSpreadColors = True
> > > >>> dresPanel@gsnMaximize = True
> ; use full
> > > >>> page
> > > >>> dresPanel@gsnPanelLabelBar = True
> ; add
> > > >>> color bar
> > > >>> dresPanel@gsnPanelTop = 0.3
> > > >>> dresPanel@gsnPanelBottom = 0.1
> > > >>> dresPanel@gsnPanelLeft = 0.0
> > > >>> dresPanel@gsnPanelRight = 0.9
> > > >>> dresPanel@gsnPanelFigureStrings = (/"e","f"/)
> > > >>> dresPanel@gsnPanelFigureStringsFontHeightF = 0.02
> > > >>> dresPanel@gsnPanelFigureStringsPerimOn = True
> > > >>> dresPanel@gsnPanelDebug = True
> > > >>>
> > > >>> dresPanel@lbOrientation = "Vertical"
> > > >>> dresPanel@lbLabelAutoStride = False
> > > >>> dresPanel@lbLabelStride = 10
> > > >>>
> > > >>> gsn_panel (wks,plot1,(/1,2/),dresPanel)
> > > >>> frame(wks)
> > > >>>
> > > >>>
> > > >>> Thanks,
> > > >>> Soumik
> > > >>>
> > > >>>
> > > >>> --
> > > >>> "Numbing the pain for a while will make it worse when you finally
> feel it.
> > > >>> ~J.K. Rowling"
> > > >>> *****************************************
> > > >>> Soumik Basu
> > > >>> Graduate Student, Research Assistant
> > > >>> International Arctic Research Center
> > > >>> University of Alaska Fairbanks
> > > >>> Fairbanks,Alaska,USA
> > > >>> *****************************************
> > > >>> <eady_eke_var_diff_spring_winter.000001.png>
> > > >>> _______________________________________________
> > > >>> ncl-talk mailing list
> > > >>> List instructions, subscriber options, unsubscribe:
> > > >>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> > > >
> > > > --
> > > > "Numbing the pain for a while will make it worse when you finally
> feel it.
> > > > ~J.K. Rowling"
> > > > *****************************************
> > > > Soumik Basu
> > > > Graduate Student, Research Assistant
> > > > International Arctic Research Center
> > > > University of Alaska Fairbanks
> > > > Fairbanks,Alaska,USA
> > > > *****************************************
> > > > <eady_eke_var_diff_spring_winter.000001.png>
> > > > _______________________________________________
> > > > ncl-talk mailing list
> > > > List instructions, subscriber options, unsubscribe:
> > > > http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 3
> > > Date: Sat, 7 Jul 2012 10:53:13 +0800
> > > From: 163 <guoyipeng163@163.com>
> > > Subject: eof function
> > > To: ncl-talk <ncl-talk@ucar.edu>
> > > Message-ID: <201207071053134695861@163.com>
> > > Content-Type: text/plain; charset="gb2312"
> > >
> > > Hi all
> > > When using NCL EOF functions, I find that all functions use
> the anomalies. It
> > > means that I have no option to use the original data or the
> standardized data
> > > and can only use the anomalies. If there are some options in
> the function that
> > > I don't know, would you please tell me?
> > >
> > > Best Regards
> > > Guo Yipeng
> > >
> > >
> > >
> > >
> > > 163
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20120707/c130f6d0/attachment.html
> > >
> > > ------------------------------
> > >
> > > Message: 4
> > > Date: Sat, 7 Jul 2012 04:12:54 +0000
> > > From: Brandon Capasso <sblueknigt@gmail.com>
> > > Subject: Re: Stripping white space at the edges
> > > To: Noel Aloysius <noel.aloysius@gmail.com>
> > > Cc: NCL Talk <ncl-talk@ucar.edu>
> > > Message-ID:
> > > <CAFrH9e1Fp1k_Cih=
> mVOhbWwazE58Bwo7EEVYLeCq7f_hrX7BGw@mail.gmail.com>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > If you're using Linux, you can use imagemagick for this if need be:
> > >
> > > > convert infile -trim outfile
> > >
> > > you can then use -border to create a border of as much white space as
> you
> > > need. hope this helps .
> > >
> > > Brandon
> > > On Jul 6, 2012 12:34 PM, "Noel Aloysius" <noel.aloysius@gmail.com>
> wrote:
> > >
> > > > Hello NCL,
> > > >
> > > > I created a panel plot with 14 figures. I want to maximize the plot
> area
> > > > by stripping the white space at the edges. I am not sure which plot
> > > > resources do this.
> > > > The section of the code and the plot is attached.
> > > >
> > > > Thank you in advance for your help,
> > > > Noel
> > > >
> > > >
> > > >
> ;***********************************************************************************************
> > > > wks = gsn_open_wks("png", diro + "pr_zonalAvg")
> > > > plot = new(14, graphic)
> > > > gsn_define_colormap(wks, "precip3_16lev")
> > > >
> > > > res1 = True ; plot mods
> desired
> > > > res1@gsnDraw = False
> > > > res1@gsnFrame = False
> > > > res1@gsnMaximize = True
> > > > res1@gsnRightStringFontHeightF = 0.04
> > > > res1@cnFillOn = True ; turn on color
> > > > res1@gsnSpreadColors = True ; use full color
> table
> > > > res1@cnLinesOn = False ; no contour
> lines
> > > > res1@cnInfoLabelOn = False
> > > > res1@pmTickMarkDisplayMode = "Always" ; turn on fancy
> tickmarks
> > > >
> > > > res1@tmXBMode = "Explicit" ; label
> independently
> > > > res1@tmXBValues = ispan(0,11,1)
> > > > res1@tmXBLabels =
> > > > (/"J","F","M","A","M","J","J","A","S","O","N","D"/)
> > > >
> > > > res1@lbLabelBarOn = False
> > > > res1@cnLevelSelectionMode = "ManualLevels"
> > > > res1@cnLevelSpacingF = 20.
> > > > res1@cnMinLevelValF = 20.
> > > > res1@cnMaxLevelValF = 300.
> > > >
> > > > res1@tmYROn = False
> > > > res1@tmXBLabelFontHeightF = 0.025
> > > > res1@tmYLLabelFontHeightF = 0.025
> > > >
> > > > do i=0,11
> > > > res1@gsnRightString = gcm_names(i)
> > > > plot(i) = gsn_csm_lat_time(wks,
> > > > PzoneLat_7100(raw_bc|0,GCM|i,lat|:,month|:), res1)
> > > > end do
> > > >
> > > > res1@gsnRightString = "Obs"
> > > > plot(12) = gsn_csm_lat_time(wks, PzoneLat_7100obs(lat|:,month|:),
> res1)
> > > >
> > > > res1@gsnRightString = "bias corr. GCM avg."
> > > > plot(13) = gsn_csm_lat_time(wks,
> PzoneLat_7100_BCavg(lat|:,month|:),
> > > > res1)
> > > >
> > > > pres1 = True
> > > > pres1@gsnPanelLabelBar = True
> > > > pres1@gsnFrame = False
> > > > pres1@lbLabelFontHeightF = 0.01
> > > > pres1@lbOrientation = "horizontal"
> > > > pres1@lbLabelAutoStride = True
> > > > pres1@gsnPanelYWhiteSpacePercent = 1.5
> > > > pres1@gsnBoxMargin = 0.0
> > > > pres1@gsnPanelRowSpec = True ; tell panel what
> order
> > > > to plot
> > > > pres1@gsnPanelCenter = True ; centered plot
> > > > pres1@gsnMaximize = True
> > > >
> > > > gsn_panel(wks,plot,(/6,6,2/),pres1)
> > > > frame(wks)
> > > >
> > > >
> ;****************************************************************************************************
> > > >
> > > >
> > > > _______________________________________________
> > > > ncl-talk mailing list
> > > > List instructions, subscriber options, unsubscribe:
> > > > http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> > > >
> > > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20120707/7c89885d/attachment.html
> > >
> > > ------------------------------
> > >
> > > Message: 5
> > > Date: Sat, 7 Jul 2012 09:00:19 +0000
> > > From: "Cannavina, Dominique" <d.cannavina11@imperial.ac.uk>
> > > Subject: Dimension mismatch on dim_sum_n the dimension
> > > relating to file input
> > > To: "ncl-talk@ucar.edu" <ncl-talk@ucar.edu>
> > > Message-ID:
> > > <D7809B440AA90D499FD431B2E7289C551F338C7A@icexch-m1.ic.ac.uk>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > Hi it seems that I was premature in my celebrations yesterday. The
> file I sent for runs of trcit below zero degress work okay .........except
> picking up the files. When I ran the script for various numbers of years
> (year per file) it was clear that my values were around the same regardless
> of how many years (or files) that I inputted.
> > >
> > >
> > >
> > > Then I remembered that I had changed the following;
> > >
> > >
> > >
> > > spell_tot_uk(:,nr,:,:) = dim_sum_n(cold_uk1(:,{spell(nr)},:,:,:),0)
> > >
> > >
> > >
> > > spell_tot_uk(0,nr,:,:) = dim_sum_n(cold_uk1(0,{spell(nr)},:,:,:),0)
> as I was trying to get around a dimension #0 mis-match. This is the
> variable that relates to file that has been inputted.
> > >
> > >
> > >
> > > So can I ask another NCL-Talk question on how to get around this
> please?
> > >
> > >
> > >
> > > The portion of the script it relates to is below and a copy of the
> full script and summary of the key variables are attached (join relates to
> number of files, spell the length of the cold run taking the tcrit from all
> ensembles at all times/steps)
> > >
> > >
> > >
> > > n1 = 1
> > >
> > > n2 = 60 ; ispan to specify all spells
> > >
> > > spell = ispan(n1,n2,1) ; eg n1=1, n2=20
> > >
> > > ;;spell = (/1, 1, 10/) ; manually specify
> > >
> > > nspell = dimsizes(spell)
> > >
> > > spell_tot_uk = new( (/njoin,nspell,nlat,mlon/), "float") ; preallocate
> > >
> > > dimspell = dimsizes(spell_tot_uk)
> > >
> > > njoin = dimspell(0)
> > >
> > > nspell = dimspell(1) ; same as "run_length"
> > >
> > > nlat = dimspell(2)
> > >
> > > mlon = dimspell(3)
> > >
> > > do nr=0,nspell-1
> > >
> > > spell_tot_uk(:,nr,:,:) = dim_sum_n(cold_uk1(:,{spell(nr)},:,:,:),0)
> > >
> > > end do
> > >
> > > spell_tot_uk!1 = "spell"
> > >
> > > spell_tot_uk&spell = spell
> > >
> > > copy_VarCoords(cold_uk1(0,0,0,:,:), spell_tot_uk(0,0,:,:)) ; trick for
> coords
> > >
> > > printVarSummary(spell_tot_uk)
> > >
> > >
> > >
> > > Any help greatly appreciated
> > >
> > >
> > >
> > > kind regards
> > >
> > >
> > >
> > > Dominique
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20120707/2d461e1f/attachment.html
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: demeter_v1_models_check.ncl
> > > Type: application/octet-stream
> > > Size: 12992 bytes
> > > Desc: demeter_v1_models_check.ncl
> > > Url :
> http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20120707/2d461e1f/attachment.obj
> > > -------------- next part --------------
> > > An embedded and charset-unspecified text was scrubbed...
> > > Name: Variables.o1827871
> > > Url:
> http://mailman.ucar.edu/pipermail/ncl-talk/attachments/20120707/2d461e1f/attachment.pl
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > ncl-talk mailing list
> > > ncl-talk@ucar.edu
> > > http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> > >
> > >
> > > End of ncl-talk Digest, Vol 104, Issue 17
> > > *****************************************
> > >
> > >
> > > _______________________________________________
> > > ncl-talk mailing list
> > > List instructions, subscriber options, unsubscribe:
> > > http://mailman.ucar.edu/mailman/listinfo/ncl-talk
> >
> >
> >
>
>
>
_______________________________________________
ncl-talk mailing list
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
Received on Mon Jul 9 10:56:07 2012
This archive was generated by hypermail 2.1.8 : Thu Jul 12 2012 - 10:16:50 MDT