Re: Overlay is not working

Hi Adam,

Thank you for your suggestions.
I followed your 2nd method and able to overlap the 2 set of plots.
But I am unable to control the viewport and as a result the plots are not exactly overlapped.
I used vpWidthF and vpHeightF as 0.8 and 0.2 respectively for both the panels.
But the plots at 2nd panel are appeared larger than that of the 1st panel.
The gsnPanelDebug for 1st panel are as follows:
            plot #0
(0) new x,y = 0.381421,0.993689
(0) orig wdt,hgt = 0.8,0.2
(0) new wdt,hgt = 0.265712,0.0664279
(0) -------Panel viewport values for each plot-------
(0) plot #1
(0) new x,y = 0.381421,0.914572
(0) orig wdt,hgt = 0.8,0.2
(0) new wdt,hgt = 0.265712,0.0664279
(0) -------Panel viewport values for each plot-------
(0) plot #2
(0) new x,y = 0.381421,0.835455
(0) orig wdt,hgt = 0.8,0.2
(0) new wdt,hgt = 0.265712,0.0664279
(0) -------Panel viewport values for each plot-------
(0) plot #3
(0) new x,y = 0.381421,0.756338
(0) orig wdt,hgt = 0.8,0.2
(0) new wdt,hgt = 0.265712,0.0664279
(0) -------Panel viewport values for each plot-------
(0) plot #4
(0) new x,y = 0.381421,0.677221
(0) orig wdt,hgt = 0.8,0.2
(0) new wdt,hgt = 0.265712,0.0664279
(0) -------Panel viewport values for each plot-------
(0) plot #5
(0) new x,y = 0.381421,0.598104
(0) orig wdt,hgt = 0.8,0.2
(0) new wdt,hgt = 0.265712,0.0664279

Should I use vpXF and vpYF for the 2nd panel?
Or should I use same vpXF and vpYF for both the panels?
What will be their values for the plots at the 2nd panels?
Please let me know the same.

Regards,
Abhik

----- Original Message -----
From: "Adam Phillips" <asphilli@ucar.edu>
To: ncl-talk@ucar.edu
Sent: Wednesday, January 2, 2013 11:05:59 PM
Subject: Re: Overlay is not working

Hi Abhik,
It looks like you are trying to overlay a XY plot onto a spatial map
plot. I would venture to guess that NCL isn't sure how to overlay the 2,
as the plot types are completely different.

Someone might have a better alternative, but I see two possibilities:
1) Create all 6 map plots, call gsn_panel (but don't advance the frame
by setting gsnFrame = False in the Panel resource list), create all 6 XY
plots, call gsn_panel, manually advance the frame. You may have to
adjust the vpWidthF/vpHeightF resources for the XY plots, and you will
likely have to set gsnPanelXWhiteSpacePercent,
gsnPanelYWhiteSpacePercent, gsnPanelBottom,gsnPanelTop,gsnPanelRight and
gsnPanelLeft in the Panel resource lists to try to get things lined up
correctly.

2) First create all 6 map plots, call gsn_panel (but don't advance the
frame by setting gsnFrame = False in the Panel resource list). Draw each
XY plot individually, exactly specifying the placement over each of your
6 map plots via the vpXY/vpYF resources. In this scenario you will want
to set gsnFrame = False in the xy resource list, and at the end of the
script call frame(wks)..

I'd recommend trying method 2 first, as even though that method is more
tedious than the 1st method, you have a higher chance of lining things
up exactly as you want them..

If you have further questions about this issue please respond to ncl-talk.
Good luck,
Adam

On 01/02/2013 01:08 AM, Abhik Santra wrote:
> Hello ncl-talk,
>
> I am trying to make 6 overlay plots in a single panel from two different datasets having different resolutions (1.25x1.25 and 1x1 degrees).
> But my overlay plots didn't work appropriately as only one set of figures are appeared in the panel.
>
> I have the script as follow:
>
>
> begin
>
> plot = new(6,graphic)
> wks = gsn_open_wks("eps","test")
> gsn_define_colormap(wks,"BlWhRe")
>
>
> do j=0, 5
>
> f1 = addfile ("XZ"+j+".nc" , "r") : res: 1.25Dx1.25D
> f2 = addfile ("X"+j+".nc" , "r") ; res: 1Dx1D
>
> z = f1->zz(0,:,:)
> x = f2->xx(0,:)
>
> lon = xx&lon
>
>
> res = True
> res@cnFillOn = True ; turn on color fill
> res@gsnDraw = False ; do not draw picture
> res@gsnFrame = False ; do not advance frame
> res@lbLabelBarOn = False ; no individual label bars
> res@gsnSpreadColors = True ; use full colormap
> res@cnLinesOn = True ; no contour lines
> res@cnLineThicknessF = 0.6
> res@cnLineColor = "gray"
> res@cnInfoLabelOn = False ; turn off cn info label
> res@cnLevelSelectionMode = "ManualLevels" ; set manual contour levels
> res@cnMinLevelValF = -0.3 ; set min contour level
> res@cnMaxLevelValF = 0.3 ; set max contour level
> res@cnLevelSpacingF = 0.05 ; set contour spacing
> res@cnLineLabelsOn = False
> res@tmXBLabelFontHeightF = 0.0
> res@tmYLLabelFontHeightF = 0.018
> res@tmYROn = False
> res@tmYRMinorOn = False
> res@trYReverse = True
> res@vpHeightF = 0.2 ; default 0.6
> res@vpWidthF = 0.8 ; default 0.6
>
> plotz = gsn_csm_contour(wks,z,res) ; !! This is only coming in the panel !!
>
> xyres = True
> xyres@gsnDraw = False ; don't draw
> xyres@gsnFrame = False
> xyres@tmXTOn = False
> xyres@tmYLOn = False
> xyres@tmYROn = True
> xyres@tmYRLabelsOn = True
> xyres@trYMinF = -5. ; set Y-axis max and mins
> xyres@trYMaxF = 5.
> xyres@gsnYRefLine = 0. ; Y-value for ref. line
> xyres@xyLineThicknesses = (/3./) ; Define line thicknesses
> xyres@xyLineColors = (/"black"/) ; Define line color
> xyres@trXMaxF = 360.
>
> plotx = gsn_csm_xy(wks,lon,x,xyres)
> overlay(plotz,plotx)
> plot(j) = plotz
>
> delete(plotz)
> delete(plotx)
> delete(res)
> delete(xyres)
> delete(ntim)
> delete(x)
> delete(z)
>
> j=j+1
>
> end do
> ;*******************************************
> ; create panel resources
> ;*******************************************
> resP = True ; mods desired
> resP@gsnFrame = False ; save panel until all ready
> ;resP@gsnMaximize = True ; Maximize in frame
> resP@gsnPanelBottom = 0.35
> resP@gsnPanelLabelBar = True ; commom label bar
> resP@lbLabelStride = 2 ; every 2nd label
> resP@lbLabelFontHeightF = 0.01
> resP@pmLabelBarHeightF = 0.06
> resP@gsnPanelFigureStringsFontHeightF = 0.007
> resP@pmLabelBarOrthogonalPosF = 0.01
> resP@gsnAttachPlotsXAxis = True
> resP@gsnScale = True
>
> gsn_panel(wks,plot,(/6,1/),resP) ; create panels
>
> frame(wks)
> end
>
> Can anyone suggest me the way to solve this problem?
> Thanks in advance and wish you a happy new year.
>
> Regards,
> Abhik
> ______________________________
> Abhik Santra
> CSIR Research Fellow,
> Indian Institute of Tropical Meteorology,
> Pune - 411008.
> India
> _______________________________________________
> ncl-talk mailing list
> List instructions, subscriber options, unsubscribe:
> http://mailman.ucar.edu/mailman/listinfo/ncl-talk

-- 
______________________________________________________________
Adam Phillips                                asphilli@ucar.edu
NCAR/Climate and Global Dynamics Division       (303) 497-1726
P.O. Box 3000				
Boulder, CO 80307-3000    http://www.cgd.ucar.edu/cas/asphilli
_______________________________________________
ncl-talk mailing list
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
_______________________________________________
ncl-talk mailing list
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk