Re: Fwd: need leave increase the figure for a good view, please

I would recommend the use of maximize_output at the end of your script. It
should be called after you have added everything to the plot and
essentially right before you want to look at the image. You'll notice, if
you look at the code that accompanies the example you linked to, that the
call to maximize_output is the last procedure call in the script. See:
http://www.ncl.ucar.edu/Applications/Scripts/panel_20.ncl

You will also most likely want to set gsnDraw and gsnFrame to False earlier
in your script to ensure that everything is drawn at the same time when you
call maximize_output (it looks like you have this done already, which is
great!). I'm not sure if the gsn_panel call works any differently, as I've
never had to maximize a panel plot.

In the script in your original email, I would include the call as such:

resP = True ; modify the panel plot
resP@txString = "Precipitacao convectiva"
resP@gsnPanelLabelBar = True ; add common colorbar
resP@gsnMaximize = True
resP@gsnFrame = True
resP@lbLabelFontHeightF = 0.007 ; make labels smaller
gsn_panel(wks,plot,(/15,3/),resP) ; now draw as one plot
;This is the new line
maximize_output(wks,True)
end

If this still doesn't work, let us know.

Kyle

----------------------------------------
Kyle S. Griffin
Department of Atmospheric and Oceanic Sciences
University of Wisconsin - Madison
Room 1421
1225 W Dayton St, Madison, WI 53706
Email: ksgriffin2@wisc.edu

On Wed, Aug 7, 2013 at 10:28 AM, Debora Alvim <deborasalvim@gmail.com>wrote:

> Hi NCL,
>
> I don't need better my resolution. The resolution figure is good.
>
> I need maximize plots in all frame. I need this figure in entire
> workstation. I saw this example
> http://www.ncl.ucar.edu/Applications/Images/panel_20_lg.png
> but I don't know where put in my script
>
> psres = True
> maximize_output(wks,psres)
>
> if you can help me I'll be thankful
>
> Look my figure attached in this email, the size is terrible.
>
> Thank you,
> Debora Alvim.
>
>
>
>
>
>
> 2013/8/7 Kyle Griffin <ksgriffin2@wisc.edu>
>
>> Hi Debora,
>>
>> I'd recommend trying to use the wkWidth and wkHeight settings, as these
>> work well when you're outputting directly to PNG format. In general, try
>> the lines below before creating your wks
>>
>> wksType = "png"
>> ; The next two statements specify the width and height of the PNG output
>> in pixels.
>> wksType@wkWidth = 1000
>> wksType@wkHeight = 1200
>>
>> ; This replaces the gsn_open_wks line you included in your script
>> previously
>> wks = gsn_open_wks(wksType,"prcv")
>>
>>
>> You may also want to look into the maximize_output function (see NCL
>> site) as well if you want to be sure your figure is filling the entire
>> workstation.
>>
>> Hope this helps,
>>
>>
>> Kyle
>>
>> ----------------------------------------
>> Kyle S. Griffin
>> Department of Atmospheric and Oceanic Sciences
>> University of Wisconsin - Madison
>> Room 1421
>> 1225 W Dayton St, Madison, WI 53706
>> Email: ksgriffin2@wisc.edu
>>
>>
>> On Wed, Aug 7, 2013 at 9:43 AM, Debora Alvim <deborasalvim@gmail.com>wrote:
>>
>>>
>>>
>>> Dear NCL,
>>>
>>> Recently I started using ncl with the help of the site, I lay in this
>>> tool.
>>>
>>> I made a figure, but I would leave this bigger picture, to that I can
>>> view the maps.
>>>
>>> I am sending the script and the figure attached and the same script
>>> below.
>>>
>>> Thank you!
>>>
>>> Cheers,
>>> Débora Alvim.
>>> National Institute for Space Research
>>> Cachoeira Paulista - São Paulo - Brazil
>>>
>>>
>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_code.ncl"
>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/gsn_csm.ncl"
>>> load "$NCARG_ROOT/lib/ncarg/nclscripts/csm/contributed.ncl"
>>> begin
>>>
>>> a = addfile ("/Users/inpe/Documents/testec/testec_199910.01_echam.nc
>>> ","r")
>>> printVarSummary(a->aprc)
>>> preca = a->aprc(0,:,:)
>>>
>>> b = addfile ("/Users/inpe/Documents/testec/testec_199911.01_echam.nc
>>> ","r")
>>> printVarSummary(b->aprc)
>>> precb = b->aprc(0,:,:)
>>>
>>> c = addfile ("/Users/inpe/Documents/testec/testec_199912.01_echam.nc
>>> ","r")
>>> printVarSummary(c->aprc)
>>> precc = c->aprc(0,:,:)
>>>
>>> d = addfile ("/Users/inpe/Documents/testec/testec_200001.01_echam.nc
>>> ","r")
>>> printVarSummary(d->aprc)
>>> precd = d->aprc(0,:,:)
>>>
>>> e = addfile ("/Users/inpe/Documents/testec/testec_200002.01_echam.nc
>>> ","r")
>>> printVarSummary(e->aprc)
>>> prece = e->aprc(0,:,:)
>>>
>>> f = addfile ("/Users/inpe/Documents/testec/testec_200003.01_echam.nc
>>> ","r")
>>> printVarSummary(f->aprc)
>>> precf = f->aprc(0,:,:)
>>>
>>> g = addfile ("/Users/inpe/Documents/testec/testec_200004.01_echam.nc
>>> ","r")
>>> printVarSummary(g->aprc)
>>> precg = g->aprc(0,:,:)
>>>
>>> h = addfile ("/Users/inpe/Documents/testec/testec_200005.01_echam.nc
>>> ","r")
>>> printVarSummary(h->aprc)
>>> prech = h->aprc(0,:,:)
>>>
>>> i = addfile ("/Users/inpe/Documents/testec/testec_200006.01_echam.nc
>>> ","r")
>>> printVarSummary(i->aprc)
>>> preci = i->aprc(0,:,:)
>>>
>>> j = addfile ("/Users/inpe/Documents/testec/testec_200007.01_echam.nc
>>> ","r")
>>> printVarSummary(j->aprc)
>>> precj = j->aprc(0,:,:)
>>>
>>> k = addfile ("/Users/inpe/Documents/testec/testec_200008.01_echam.nc
>>> ","r")
>>> printVarSummary(k->aprc)
>>> preck = k->aprc(0,:,:)
>>>
>>> l = addfile ("/Users/inpe/Documents/testec/testec_200009.01_echam.nc
>>> ","r")
>>> printVarSummary(l->aprc)
>>> precl = l->aprc(0,:,:)
>>>
>>> m = addfile ("/Users/inpe/Documents/testec/testec_200010.01_echam.nc
>>> ","r")
>>> printVarSummary(m->aprc)
>>> precm = m->aprc(0,:,:)
>>>
>>> n = addfile ("/Users/inpe/Documents/testec/testec_200011.01_echam.nc
>>> ","r")
>>> printVarSummary(n->aprc)
>>> precn = n->aprc(0,:,:)
>>>
>>> o = addfile ("/Users/inpe/Documents/testec/testec_200012.01_echam.nc
>>> ","r")
>>> printVarSummary(o->aprc)
>>> preco = o->aprc(0,:,:)
>>>
>>>
>>> ; Plot
>>> wks = gsn_open_wks("png","prcv")
>>> gsn_define_colormap(wks,"prcp_2")
>>>
>>> plot = new(15,graphic)
>>>
>>> res = True
>>> res@gsnDraw = False ; don't draw
>>> res@gsnFrame = False ; don't advance frame
>>> res@cnInfoLabelOn = False ; turn off cn info label
>>> res@cnFillOn = True ; turn on color
>>> res@gsnSpreadColors = True ; spread out color table
>>> res@gsnSpreadColorStart = 2
>>> res@gsnSpreadColorEnd = 20
>>> res@lbLabelBarOn = False ; turn off individual cb's
>>>
>>>
>>>
>>> plot(0) = gsn_csm_contour_map_ce(wks,preca,res)
>>> plot(1) = gsn_csm_contour_map_ce(wks,precb,res)
>>> plot(2) = gsn_csm_contour_map_ce(wks,precc,res)
>>> plot(3) = gsn_csm_contour_map_ce(wks,precd,res)
>>> plot(4) = gsn_csm_contour_map_ce(wks,prece,res)
>>> plot(5) = gsn_csm_contour_map_ce(wks,precf,res)
>>> plot(6) = gsn_csm_contour_map_ce(wks,precg,res)
>>> plot(7) = gsn_csm_contour_map_ce(wks,prech,res)
>>> plot(8) = gsn_csm_contour_map_ce(wks,preci,res)
>>> plot(9) = gsn_csm_contour_map_ce(wks,precj,res)
>>> plot(10) = gsn_csm_contour_map_ce(wks,preck,res)
>>> plot(11) = gsn_csm_contour_map_ce(wks,precl,res)
>>> plot(12) = gsn_csm_contour_map_ce(wks,precm,res)
>>> plot(13) = gsn_csm_contour_map_ce(wks,precn,res)
>>> plot(14) = gsn_csm_contour_map_ce(wks,preco,res)
>>>
>>>
>>> resP = True ; modify the panel plot
>>> resP@txString = "Precipitacao convectiva"
>>> resP@gsnPanelLabelBar = True ; add common colorbar
>>> resP@gsnMaximize = True
>>> resP@gsnFrame = True
>>> resP@lbLabelFontHeightF = 0.007 ; make labels smaller
>>> gsn_panel(wks,plot,(/15,3/),resP) ; now draw as one plot
>>> end
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> ncl-talk mailing list
>>> List instructions, subscriber options, unsubscribe:
>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>
>>>
>>
>

_______________________________________________
ncl-talk mailing list
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
Received on Wed Aug 7 10:21:42 2013