Setting lbLabelStride = 2 changes the label bar labeling to every 2nd
label. Note this resource only applies when you are drawing a label bar,
which in the last image you sent you were not. If you modified things to
draw a panel label bar, then lbLabelStride needs to be set in the panel
resource list (resP). If instead you are drawing a label bar for each
plot, then lbLabelStride needs to be set in the individual plot resource
list (in your case: res)
Finally, if you are using v6.1.0, and you are indeed drawing a labelbar,
then lbLabelAutoStride defaults to False:
http://www.ncl.ucar.edu/Document/Graphics/Resources/lb.shtml#lbLabelAutoStride
and if you wish to use lbLabelStride you also need to set
lbLabelAutoStride = False
On 01/08/2013 12:04 PM, Waqar Younas wrote:
> Thanks for the response.
> I want to keep both the contour levels and longitudes values for each
> panel. So the only way to do it is to increase the space between
> panels. For that you redirect me to the example, which i used. I do
> not know why
> res@lbLabelStride = 2
> is not working.
> Thanks.
>
>
> On Tue, Jan 8, 2013 at 10:49 AM, Adam Phillips <asphilli@ucar.edu
> <mailto:asphilli@ucar.edu>> wrote:
>
> Hi Waqar,
> I see that you are not specifying the contour levels in your
> coding. If that is indeed the case, then you are allowing NCL to
> come up with the contour levels, and NCL might not choose the same
> contour levels for each of your 6 panels. You should explicitly be
> setting the contour levels. Try searching for "contour levels" in
> the search bar. The first result should be the "Contour Levels"
> applications page. Click on that, and take a look at example #3 on
> how to set your own contour levels.
>
> (http://www.ncl.ucar.edu/Applications/contourLev.shtml)
>
> With regards to the InfoLabel bar overlapping the longitude
> values, you can either turn the InfoLabel bar off
> (res@cnInfoLabelOn = False), or you can adjust the positioning by
> setting res@cnInfoLabelOrthogonalPosF to say -.03:
> http://www.ncl.ucar.edu/Document/Graphics/Resources/cn.shtml#cnInfoLabelOrthogonalPosF
> http://www.ncl.ucar.edu/Document/Graphics/Resources/cn.shtml#cnInfoLabelOn
> Adam
>
>
>
> On 01/08/2013 11:37 AM, Waqar Younas wrote:
>> Thanks Adams.
>> Now in the figure i shaded the variabilities greater than 6, i
>> want to remove those contours which are not shaded and are less
>> than 6.
>> Thanks.
>>
>>
>>
>> On Tue, Jan 8, 2013 at 8:16 AM, Adam Phillips <asphilli@ucar.edu
>> <mailto:asphilli@ucar.edu>> wrote:
>>
>> Hi Waqar,
>> The panels all look good to me with the exception of panel
>> #6, where the gsnLeftString is overlapping the
>> gsnCenterString. If you do not want that, set gsnLeftString =
>> "", or decrease the font heights of the Left and Center
>> Strings.. See example 1 on the page I previously pointed you to:
>> http://www.ncl.ucar.edu/Applications/font.shtml
>> Adam
>>
>>
>> On 01/07/2013 10:32 PM, Waqar Younas wrote:
>>> The labels of figures and titles are overlapping.
>>> Thanks.
>>>
>>> On Sun, Jan 6, 2013 at 10:35 AM, Adam Phillips
>>> <asphilli@ucar.edu <mailto:asphilli@ucar.edu>> wrote:
>>>
>>> Hi Waqar,
>>> Whenever you want to know how to do something, it is
>>> suggested that you first use the NCL search box located
>>> in the upper right part of the NCL website's pages. If
>>> that does not work I would try looking at the NCL
>>> example page here:
>>> http://www.ncl.ucar.edu/Applications/
>>> <http://www.ncl.ucar.edu/Applications/font.shtml>
>>> to see if any categories exist that might help you solve
>>> your problem. In this case, there is an application
>>> category called Font Heights:
>>> http://www.ncl.ucar.edu/Applications/font.shtml
>>> See examples 3 and 5.
>>>
>>> If that does not solve your issue please respond to
>>> ncl-talk.
>>> Adam
>>>
>>> On Jan 5, 2013, at 23:14, Waqar Younas
>>> <vickyqau@gmail.com <mailto:vickyqau@gmail.com>> wrote:
>>>
>>>>
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: *Waqar Younas* <vickyqau@gmail.com
>>>> <mailto:vickyqau@gmail.com>>
>>>> Date: Fri, Jan 4, 2013 at 5:31 PM
>>>> Subject: Increasing font size of title and x and y-axis.
>>>> To: ncl-talk@ucar.edu <mailto:ncl-talk@ucar.edu>
>>>>
>>>>
>>>> Hi
>>>> I want to increase the font size of title and x and
>>>> y-axis so that they are more clearly visible.
>>>> Please find attached the figure.
>>>> Here is the code.
>>>>
>>>> Here the lat are from 30S to 30N with global longitudes.
>>>>
>>>> plot = new (50,graphic)
>>>>
>>>>
>>>> res = True
>>>> res@gsnDraw = False ; don't draw yet
>>>> res@gsnFrame = False ; don't advance frame yet
>>>> res@gsnSpreadColors = True ; spread out color table
>>>> res@gsnAddCyclic = False ; plotted dataa are not cyclic
>>>> res@mpFillOn = True ; turn off map fill
>>>> res@cnFillOn = False ; turn on color fill
>>>> res@cnLinesOn = True ; True is default
>>>> res@cnLineLabelsOn = True ; True is default
>>>> res@lbLabelBarOn = True ; turn off individual lb's
>>>>
>>>> res@mpMaxLatF = maxlat0
>>>> res@mpMinLatF = minlat0
>>>> res@mpMaxLonF = maxlon0
>>>> res@mpMinLonF = minlon0
>>>> res@mpCenterLatF = (maxlat0-minlat0)/2+minlat0
>>>> res@mpCenterLonF = (maxlon0-minlon0)/2+minlon0
>>>>
>>>> resP = True ; modify the panel plot
>>>>
>>>> ; panel plot only resources
>>>>
>>>> wks = gsn_open_wks("eps","u850_winter_ENSEMBLES")
>>>> gsn_define_colormap(wks, "BlWhRe")
>>>>
>>>> opt = True
>>>> opt@gsnShadeFillType = "color"
>>>> opt@gsnShadeHigh = "grey70"
>>>> opt@gsnShadeLow = "grey25"
>>>> res@gsnCenterString ="u850_ECMWF_winter"
>>>> plot(0)=gsn_csm_contour_map_ce(wks,u850_ndjf_ecmwf,res)
>>>> plot(0) = gsn_contour_shade(plot(0), -999.,6.,opt)
>>>>
>>>> res@gsnCenterString ="u850_MF_winter"
>>>> plot(1)=gsn_csm_contour_map_ce(wks,u850_ndjf_mf,res)
>>>> plot(1) = gsn_contour_shade(plot(1), -999.,6.,opt)
>>>>
>>>>
>>>> res@gsnCenterString ="u850_UKMO_winter"
>>>> plot(2)=gsn_csm_contour_map_ce(wks,u850_ndjf_ukmo,res)
>>>> plot(2) = gsn_contour_shade(plot(2), -999.,6.,opt)
>>>>
>>>>
>>>> res@gsnCenterString ="u850_CMCC_INGV_winter"
>>>> plot(3)=gsn_csm_contour_map_ce(wks,u850_ndjf_cmcc_ingv,res)
>>>> plot(3) = gsn_contour_shade(plot(3), -999.,6.,opt)
>>>>
>>>>
>>>> res@gsnCenterString ="u850_IFM_GEOMAR_winter"
>>>> plot(4)=gsn_csm_contour_map_ce(wks,u850_ndjf_ifm_geomar,res)
>>>> plot(4) = gsn_contour_shade(plot(4), -999.,6.,opt)
>>>>
>>>> res@gsnCenterString ="u850_NCEP_winter"
>>>> plot(5)=gsn_csm_contour_map_ce(wks,NCEP_winter,res)
>>>> plot(5) = gsn_contour_shade(plot(5), -999.,6.,opt)
>>>>
>>>> gsn_panel(wks,plot,(/3,2/),resP)
>>>>
>>>> Thanks.
>>>>
>>>> --
>>>> Best Regards
>>>>
>>>> Waqar Younas
>>>> PhD Candidate
>>>> Natural Resources and Environmental Studies (NRES)
>>>> University of Northern British Columbia (UNBC)
>>>> Canada
>>>>
>>>>
>>>>
>>>> --
>>>> Best Regards
>>>>
>>>> Waqar Younas
>>>> PhD Candidate
>>>> Natural Resources and Environmental Studies (NRES)
>>>> University of Northern British Columbia (UNBC)
>>>> Canada
>>>> <u850_summer_ENSEMBLES.eps>
>>>> _______________________________________________
>>>> ncl-talk mailing list
>>>> List instructions, subscriber options, unsubscribe:
>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>
>>>
>>>
>>>
>>> --
>>> Best Regards
>>>
>>> Waqar Younas
>>> PhD Candidate
>>> Natural Resources and Environmental Studies (NRES)
>>> University of Northern British Columbia (UNBC)
>>> Canada
>>>
>>>
>>> On Sun, Jan 6, 2013 at 10:35 AM, Adam Phillips
>>> <asphilli@ucar.edu <mailto:asphilli@ucar.edu>> wrote:
>>>
>>> Hi Waqar,
>>> Whenever you want to know how to do something, it is
>>> suggested that you first use the NCL search box located
>>> in the upper right part of the NCL website's pages. If
>>> that does not work I would try looking at the NCL
>>> example page here:
>>> http://www.ncl.ucar.edu/Applications/
>>> <http://www.ncl.ucar.edu/Applications/font.shtml>
>>> to see if any categories exist that might help you solve
>>> your problem. In this case, there is an application
>>> category called Font Heights:
>>> http://www.ncl.ucar.edu/Applications/font.shtml
>>> See examples 3 and 5.
>>>
>>> If that does not solve your issue please respond to
>>> ncl-talk.
>>> Adam
>>>
>>> On Jan 5, 2013, at 23:14, Waqar Younas
>>> <vickyqau@gmail.com <mailto:vickyqau@gmail.com>> wrote:
>>>
>>>>
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: *Waqar Younas* <vickyqau@gmail.com
>>>> <mailto:vickyqau@gmail.com>>
>>>> Date: Fri, Jan 4, 2013 at 5:31 PM
>>>> Subject: Increasing font size of title and x and y-axis.
>>>> To: ncl-talk@ucar.edu <mailto:ncl-talk@ucar.edu>
>>>>
>>>>
>>>> Hi
>>>> I want to increase the font size of title and x and
>>>> y-axis so that they are more clearly visible.
>>>> Please find attached the figure.
>>>> Here is the code.
>>>>
>>>> Here the lat are from 30S to 30N with global longitudes.
>>>>
>>>> plot = new (50,graphic)
>>>>
>>>>
>>>> res = True
>>>> res@gsnDraw = False ; don't draw yet
>>>> res@gsnFrame = False ; don't advance frame yet
>>>> res@gsnSpreadColors = True ; spread out color table
>>>> res@gsnAddCyclic = False ; plotted dataa are not cyclic
>>>> res@mpFillOn = True ; turn off map fill
>>>> res@cnFillOn = False ; turn on color fill
>>>> res@cnLinesOn = True ; True is default
>>>> res@cnLineLabelsOn = True ; True is default
>>>> res@lbLabelBarOn = True ; turn off individual lb's
>>>>
>>>> res@mpMaxLatF = maxlat0
>>>> res@mpMinLatF = minlat0
>>>> res@mpMaxLonF = maxlon0
>>>> res@mpMinLonF = minlon0
>>>> res@mpCenterLatF = (maxlat0-minlat0)/2+minlat0
>>>> res@mpCenterLonF = (maxlon0-minlon0)/2+minlon0
>>>>
>>>> resP = True ; modify the panel plot
>>>>
>>>> ; panel plot only resources
>>>>
>>>> wks = gsn_open_wks("eps","u850_winter_ENSEMBLES")
>>>> gsn_define_colormap(wks, "BlWhRe")
>>>>
>>>> opt = True
>>>> opt@gsnShadeFillType = "color"
>>>> opt@gsnShadeHigh = "grey70"
>>>> opt@gsnShadeLow = "grey25"
>>>> res@gsnCenterString ="u850_ECMWF_winter"
>>>> plot(0)=gsn_csm_contour_map_ce(wks,u850_ndjf_ecmwf,res)
>>>> plot(0) = gsn_contour_shade(plot(0), -999.,6.,opt)
>>>>
>>>> res@gsnCenterString ="u850_MF_winter"
>>>> plot(1)=gsn_csm_contour_map_ce(wks,u850_ndjf_mf,res)
>>>> plot(1) = gsn_contour_shade(plot(1), -999.,6.,opt)
>>>>
>>>>
>>>> res@gsnCenterString ="u850_UKMO_winter"
>>>> plot(2)=gsn_csm_contour_map_ce(wks,u850_ndjf_ukmo,res)
>>>> plot(2) = gsn_contour_shade(plot(2), -999.,6.,opt)
>>>>
>>>>
>>>> res@gsnCenterString ="u850_CMCC_INGV_winter"
>>>> plot(3)=gsn_csm_contour_map_ce(wks,u850_ndjf_cmcc_ingv,res)
>>>> plot(3) = gsn_contour_shade(plot(3), -999.,6.,opt)
>>>>
>>>>
>>>> res@gsnCenterString ="u850_IFM_GEOMAR_winter"
>>>> plot(4)=gsn_csm_contour_map_ce(wks,u850_ndjf_ifm_geomar,res)
>>>> plot(4) = gsn_contour_shade(plot(4), -999.,6.,opt)
>>>>
>>>> res@gsnCenterString ="u850_NCEP_winter"
>>>> plot(5)=gsn_csm_contour_map_ce(wks,NCEP_winter,res)
>>>> plot(5) = gsn_contour_shade(plot(5), -999.,6.,opt)
>>>>
>>>> gsn_panel(wks,plot,(/3,2/),resP)
>>>>
>>>> Thanks.
>>>>
>>>> --
>>>> Best Regards
>>>>
>>>> Waqar Younas
>>>> PhD Candidate
>>>> Natural Resources and Environmental Studies (NRES)
>>>> University of Northern British Columbia (UNBC)
>>>> Canada
>>>>
>>>>
>>>>
>>>> --
>>>> Best Regards
>>>>
>>>> Waqar Younas
>>>> PhD Candidate
>>>> Natural Resources and Environmental Studies (NRES)
>>>> University of Northern British Columbia (UNBC)
>>>> Canada
>>>> <u850_summer_ENSEMBLES.eps>
>>>> _______________________________________________
>>>> ncl-talk mailing list
>>>> List instructions, subscriber options, unsubscribe:
>>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>>
>>>
>>>
>>>
>>> --
>>> Best Regards
>>>
>>> Waqar Younas
>>> PhD Candidate
>>> Natural Resources and Environmental Studies (NRES)
>>> University of Northern British Columbia (UNBC)
>>> Canada
>>>
>>>
>>> _______________________________________________
>>> ncl-talk mailing list
>>> List instructions, subscriber options, unsubscribe:
>>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>
>> --
>> ______________________________________________________________
>> Adam Phillipsasphilli@ucar.edu <mailto:asphilli@ucar.edu>
>> NCAR/Climate and Global Dynamics Division(303) 497-1726 <tel:%28303%29%20497-1726>
>> P.O. Box 3000
>> Boulder, CO 80307-3000http://www.cgd.ucar.edu/cas/asphilli
>>
>>
>> _______________________________________________
>> ncl-talk mailing list
>> List instructions, subscriber options, unsubscribe:
>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>>
>>
>>
>>
>> --
>> Best Regards
>>
>> Waqar Younas
>> PhD Candidate
>> Natural Resources and Environmental Studies (NRES)
>> University of Northern British Columbia (UNBC)
>> Canada
>>
>>
>> _______________________________________________
>> ncl-talk mailing list
>> List instructions, subscriber options, unsubscribe:
>> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
> --
> ______________________________________________________________
> Adam Phillipsasphilli@ucar.edu <mailto:asphilli@ucar.edu>
> NCAR/Climate and Global Dynamics Division(303) 497-1726 <tel:%28303%29%20497-1726>
> P.O. Box 3000
> Boulder, CO 80307-3000http://www.cgd.ucar.edu/cas/asphilli
>
>
> _______________________________________________
> ncl-talk mailing list
> List instructions, subscriber options, unsubscribe:
> http://mailman.ucar.edu/mailman/listinfo/ncl-talk
>
>
>
>
> --
> Best Regards
>
> Waqar Younas
> PhD Candidate
> Natural Resources and Environmental Studies (NRES)
> University of Northern British Columbia (UNBC)
> Canada
-- ______________________________________________________________ Adam Phillips asphilli@ucar.edu NCAR/Climate and Global Dynamics Division (303) 497-1726 P.O. Box 3000 Boulder, CO 80307-3000 http://www.cgd.ucar.edu/cas/asphilli
_______________________________________________
ncl-talk mailing list
List instructions, subscriber options, unsubscribe:
http://mailman.ucar.edu/mailman/listinfo/ncl-talk
Received on Tue Jan 8 15:10:42 2013
This archive was generated by hypermail 2.1.8 : Mon Jan 14 2013 - 14:31:38 MST